یه خط کشیدم با s pline
هر کار میکنم با trim پاک نمیشه چکار کنم؟؟؟
هر کار میکنم با trim پاک نمیشه چکار کنم؟؟؟
سی دی آموزشی پارسیان رو بگیر به درد می خورهسلام یه سوال ...
من حدود 1 ماه وقت دارم ... باید اتوکد یاد بگیرم واسه یه مصاحبه کاریه .... ایا می تونم تو 1 ماه به اندازه ای یاد بگیرم که تو مصاحبه کم نیارم ... روزی 2 ساعت واسش وقت بزارم ..... چه کنابی پیشنهاد می کنین ؟؟؟؟؟؟؟؟؟؟ ممنون میشم کمک کنین .....ار کجا شروع کنم .... قبلا یه کم کار کردم
من الان 2009 ندارم ولی توی 2007 از این روش میشه کار رو انجام داد:سلام به همه دوستان
من 1 سوال داشتم.......... آسونه
ميخوام صفحه كد 2009 رو كه كلاسيكش كردم ، مشكيش كنم
جون من كمكم كنين چشام از حدقه در اومد از بس به اين صفحه سفيد نگاه كردم
نه خیر هرکس بلده زودی بیاد جواب مردم رو بده که منتظر نموننددوستی ناراحتی نداره که خوب راحت بگو نباید جواب دوستان کسی جز من که این تاپیک باز کردم بدهد
البته بگذریم از اینکه تنها من نبودم که به قصد رفع مشکل دوستان جوابشون دادم
خوب جواب خلق الله نمی یاید زود بدهید دیگه.این طور می شه
راستی تشکر کردیدا-اگه ناراحتید خوب تشکر نمی کردید که ما هم بالاخره بدانیم باید جواب دوستان رو بدهیم یا ناراحت می شید و دوست ندارید
در رابطه با اسم تاپیک به شرطی خوبه که بلدباشید سوالات مربوط به 3dرو هم جواب بدهید
نه خیر هرکس بلده زودی بیاد جواب مردم رو بده که منتظر نمونند
راستی من کلا تُن صدام بلنده که اینجوری حرف میزنم:
تاپیک زدن که شاهکار نیست مهم اینه که شما بعد از اینکه من مُردم (که بازم خدا اون روز رو نمیاره ) بیاید و اینجا رو جمع و جور کنید ، حالا چون فلانـــی تاپیک زده که نباید شما نیگا کنی
دستتم درد نکنه که کار منو کمتر میکنی
اهم اهم
.
.
صدام گرفت ازبس داد زدم
یه خط کشیدم با s pline
هر کار میکنم با trim پاک نمیشه چکار کنم؟؟؟
بعله وانتم میخوای سوارشی ؟؟؟؟!!خیلی خوب بابا داد زدن نداره
این همه داد زدی که بگیم خدا اون روز رو نیاره -خوب باشه خدا اون روز نیاره ه ه
خواهش می کنم قابلی نداشت
اما نگفتی کد 3dهم واردی یا نه
بعله وانتم میخوای سوارشی ؟؟؟؟!!
شما بپرسیدنه دور از جون وانت چرااااااااااااااااااااااااا؟
نگفتید بالاخره کد3d بلدید یا نه سوال داشتم
سلاماگر پلان یا طرح سه بعدی خواستی من دارم
ترجیحا cad 2007 سوال کنین
سلام
وقت بخیر
سوال اینکه چطوری میشه در اتوکد به هر object یک شماره اختصاص بدیم و بعدا بتونیم با همان شماره سوژه را در اتوکد سرچ کنیم؟
مثلا فرض بفرمائید که 10 تا خط در صفحه ترسیم کردیم حال چطوری میتونیم به هر خط یک شماره اختصاص دهیم مثلا خط شماره 1 و خط شماره 2 و ...
این کار رو اگه با M-text تایپ کرده باشی می شه راحت انجام داد و گرنه اگه D-text باشه باید دستی برای هر خط انجام بدیسلام
وقت بخیر
سوال اینکه چطوری میشه در اتوکد به هر object یک شماره اختصاص بدیم و بعدا بتونیم با همان شماره سوژه را در اتوکد سرچ کنیم؟
مثلا فرض بفرمائید که 10 تا خط در صفحه ترسیم کردیم حال چطوری میتونیم به هر خط یک شماره اختصاص دهیم مثلا خط شماره 1 و خط شماره 2 و ...
سلام
وقت بخیر
سوال اینکه چطوری میشه در اتوکد به هر object یک شماره اختصاص بدیم و بعدا بتونیم با همان شماره سوژه را در اتوکد سرچ کنیم؟
مثلا فرض بفرمائید که 10 تا خط در صفحه ترسیم کردیم حال چطوری میتونیم به هر خط یک شماره اختصاص دهیم مثلا خط شماره 1 و خط شماره 2 و ...
دوستی ممکن توضیح بدهید حالا چطور می خوایید تو کد سرچش کنیداین کار رو اگه با M-text تایپ کرده باشی می شه راحت انجام داد و گرنه اگه D-text باشه باید دستی برای هر خط انجام بدی
برای این کار، فقط کافیه رو خطا دابل کلیک کنی تا انتخاب بشن(برایM-line) ، بعدش همه خط ها رو انتخاب کنی، بعدش از اون Editor بالا که Bullet و Numbering داره Numbering رو انتخاب کنی تا قبل از هر خطی یه شماره بیاد
دوستی ممکن توضیح بدهید حالا چطور می خوایید تو کد سرچش کنید
نه دوستی مقصودم این بود گمان نمی کنم مقصود این دوست درست متوجه شده باشید و درست براشون توضیح داده باشیدراستش من قسمت عدد دهیش رو گفتم
اما در مورد سرچ کردن راستش نمی دونم منظورتون چیه...
یعنی اینکه توی یه نقشه باز، یه عددی رو تایپ کنید و cad اون خط رو براتون بیاره؟
اگه منظورتون اینه که فکر نمی کنم همچین چیزی داشته باشیم .
چونکه وقتی نقشه باز باشه، هر چیزی که شما تایپ می کنید بعنوان یک فرمان (وقتی یه فرمان فعال نیست) یا یه ورودی اون فرمان(وقتی یه فرمان در حال اجراست) تلقی می شه
البته همیشه می تونی چیزای هم نوع رو توی یه لایه بذاری تا بعدا راحت بتونی اونا رو با هم انتخاب کنی.
سلام . برای ذخیره به صورت عکس .وارد منوی file/save asمیشی و در قست پایین اسم فایل را با هر فرمتی بخواهی میدهی .
اگر ما يك محدوده داشته باشيم و احتمال برود كه قسمتي از اين محدوده بسته نباشد و با چشم هم توسط كاربر ديده نشود وقتي ما بخاهيم اين محدوده را هاشور بزنيم چه روشي وجود دارد كه مثلا براي اتوكد تنظيماتي انجام دهيم كه بتواند اين محدوده نيمه باز را هاشور بزند؟
ظاهرا بايد در قسمتي يك سري تنظيم انجام داد كه مثلا اگر محدوده به اندازه دو واحد باز باشد باز هم هاشور زده شود./
راستش دوست عزیز مشکل اصلی من این نیست.
مسئله اینه که چطور اونو به اندازه A4 تکه تکه کنم؟
سلام دوستان
سوال من اینه چطوری میتونم یه فایل از کد به تری دی مکس ببرم ...
میشه لطفا منو راهنمایی کنید .نمی دونم چطوری می تونم پلانی که تو کد کشیدم رو به مکس ببرم و سه بعدیش کنم .
To install the 3DSOUT command files
Download the 3dsout32bit_enu.exe or 3dsout64bit_enu.exe, to any temporary location.
Double-click the EXE file.
Click Yes to accept the terms of the license agreement.
Enter the location of the program folder for which you want to use the 3DSOUT command (for example, c:\Program Files\AutoCAD 2007 or c:\Program Files\AutoCAD 2008).
Click OK.
Important: If you are installing on a machine running Microsoft� Windows VistaTM, you must extract the files to a temporary folder (for example, c:\3dsout), and then manually copy the Ac3DSOUT.arx and Ac3DSOUTRes.dll files to the program files folder for which you want to use the 3DSOUT command.
Overview
The 3DSOUT command allows you to create a file in the 3D Studio (3DS) format. 3DSOUT saves 3D geometry and views in the 3DS exported 3DS file. 3DSOUT exports circles, polygonal meshes, polyface meshes, and objects with surface characteristics. Lights and materials created in AutoCAD 2006 or earlier releases are also saved in the 3DS file.
Note Lights and materials created in AutoCAD 2007 and later releases may be exported, but they are not exported properly and their behavior is unpredictable and not consistent with lights and materials created in AutoCAD 2006 and earlier releases.
3DSOUT exports only those objects with surface characteristics. A line or an arc must have a nonzero thickness. A trace or a polyline must have a nonzero width or thickness. Circles, polygon meshes, and polyface meshes are always exported. Solids and 3D faces must have at least three unique vertices. Geometry is tessellated on export, as necessary.
3DSOUT converts named views to 3D Studio cameras. 3DSOUT also converts the following lights (created in AutoCAD 2006 or earlier releases):
Photo Real or Photo Raytrace lights are converted to the nearest 3D Studio equivalent.
Point lights become omni lights.
Spotlights and distant lights become 3D Studio spotlights.
If the name of any object conflicts with a name already in the 3D Studio drawing, the name is assigned a sequence number to resolve the conflict. The name may have to be truncated to accommodate the sequence number.
Using 3DSOUT
To load the 3DSOUT command
(Optional) If the AutoCAD program for which you installed 3DSOUT is not already running, on the Start menu (Windows), click All Programs (or Programs), and then select the program.
At the command prompt, enter appload.
In the Load/Unload Applications dialog box, navigate to the folder where you installed the Ac3Dsout.arx file and select it.
Click Load.
Click Close.
To create a 3DS file
At the command prompt, enter 3dsout.
Select objects in the drawing to export.
Press ENTER.
In the 3D Studio Output File dialog box, in the File Name field, enter a file name.
Click Save.
In the 3D Studio File Export Options dialog box, select or change the necessary options. (See the 3DSOUT Reference below for more information about these options.)
Click OK.
سلام
من الان تازه ویندوز رو عوض کردم پس اتوکد ندارم ولی شاید این کار کنه:
داخل اتوکد، روی Menu Browser کلیک کن (اون آیکن A بزرگ)
بعدش از منوی باز شده، Export رو انتخاب کن
حالا برای نوع فایل، 3ds رو انتخاب کن و فایلت رو export کن
راستی اگه نوع 3ds توی نوع فایل هات وجود نداره، باید این کار رو بکنی:
اول این فایل رو دانلود کن
http://images.autodesk.com/adsk/files/3dsout32bit_enu.exe
بعدش
کد:To install the 3DSOUT command files Download the 3dsout32bit_enu.exe or 3dsout64bit_enu.exe, to any temporary location. Double-click the EXE file. Click Yes to accept the terms of the license agreement. Enter the location of the program folder for which you want to use the 3DSOUT command (for example, c:\Program Files\AutoCAD 2007 or c:\Program Files\AutoCAD 2008). Click OK. Important: If you are installing on a machine running Microsoft� Windows VistaTM, you must extract the files to a temporary folder (for example, c:\3dsout), and then manually copy the Ac3DSOUT.arx and Ac3DSOUTRes.dll files to the program files folder for which you want to use the 3DSOUT command. Overview The 3DSOUT command allows you to create a file in the 3D Studio (3DS) format. 3DSOUT saves 3D geometry and views in the 3DS exported 3DS file. 3DSOUT exports circles, polygonal meshes, polyface meshes, and objects with surface characteristics. Lights and materials created in AutoCAD 2006 or earlier releases are also saved in the 3DS file. Note Lights and materials created in AutoCAD 2007 and later releases may be exported, but they are not exported properly and their behavior is unpredictable and not consistent with lights and materials created in AutoCAD 2006 and earlier releases. 3DSOUT exports only those objects with surface characteristics. A line or an arc must have a nonzero thickness. A trace or a polyline must have a nonzero width or thickness. Circles, polygon meshes, and polyface meshes are always exported. Solids and 3D faces must have at least three unique vertices. Geometry is tessellated on export, as necessary. 3DSOUT converts named views to 3D Studio cameras. 3DSOUT also converts the following lights (created in AutoCAD 2006 or earlier releases): Photo Real or Photo Raytrace lights are converted to the nearest 3D Studio equivalent. Point lights become omni lights. Spotlights and distant lights become 3D Studio spotlights. If the name of any object conflicts with a name already in the 3D Studio drawing, the name is assigned a sequence number to resolve the conflict. The name may have to be truncated to accommodate the sequence number. Using 3DSOUT To load the 3DSOUT command (Optional) If the AutoCAD program for which you installed 3DSOUT is not already running, on the Start menu (Windows), click All Programs (or Programs), and then select the program. At the command prompt, enter appload. In the Load/Unload Applications dialog box, navigate to the folder where you installed the Ac3Dsout.arx file and select it. Click Load. Click Close. To create a 3DS file At the command prompt, enter 3dsout. Select objects in the drawing to export. Press ENTER. In the 3D Studio Output File dialog box, in the File Name field, enter a file name. Click Save. In the 3D Studio File Export Options dialog box, select or change the necessary options. (See the 3DSOUT Reference below for more information about these options.) Click OK.
Thread starter | عنوان | تالار | پاسخ ها | تاریخ |
---|---|---|---|---|
M | [ حذف منوهای اتوکد] رفع اشکال | AUTO CAD | 7 | |
K | [ پیام خطا در اتوکد ] Error رفع اشکال | AUTO CAD | 7 | |
[ نصب و حذف برنامه های اتوکد ]► رفع اشکال کرک اتوکد | AUTO CAD | 60 | ||
[ رفع مشکل برعکس شدن فونتها در چاپ] تنظیم پرینتر | فونت | استفاده از فرمت تصویری و PDF | AUTO CAD | 13 |