سلام
در مورد جوشکاری لوله های پلی اتیلن و روش هاش مثل الکتروفیوژن مطلب میخواستم
http://depositfiles.com/files/75hte20ms
http://depositfiles.com/files/7fb9zigdg
http://depositfiles.com/files/1zgw8f4pn
http://rapidshare.com/files/273507453/AWS_Collectionpart1.rar
http://rapidshare.com/files/273510254/AWS_Collectionpart2.rar
http://rapidshare.com/files/273510491/AWS_Collectionpart3.rar
http://rapidshare.com/files/273510552/AWS_Collectionpart4.rar
http://rapidshare.com/files/273509232/AWS_Collectionpart5.rar
http://rapidshare.com/files/273509527/AWS_Collectionpart6.rar
http://rapidshare.com/files/273509547/AWS_Collectionpart7.rar
ESI SysWeld 2010.0 | 727.4 mb
Using the Welding Simulation Solution, you can predict the heat effects of welding processes, allowing cost-effective distortion engineering, and weld quality and residual stress control.
About ESI Group Company
ESI is a world leading software editor for the numerical simulation of prototype and manufacturing process engineering in applied mechanics. The key to ESI's success is the use of realistic material physics, providing "as good as real" virtual solutions, in order to replace the lengthy trial and error processes on real prototypes.
ESI has developed an extensive suite of coherent, industry-oriented applications to realistically simulate a product’s behavior during testing and real life use; to refine manufacturing processes for desired product performance, and to evaluate the effect of the environment in which the product is deployed.
ESI’s products represent a unique collaborative and open environment for End-to-End Virtual Prototyping, thus eliminating the need for physical prototypes during product development. This solution allows a productivity gain, innovation acceleration and significantly reduced costs.
The company employs over 750 high-level specialists worldwide covering more than 30 countries.
As ESI Group development is based on continuous innovation, the company is qualified as “innovative company” by OSEO, a French innovation agency.
About ESI SysWeld
Key Features
- Minimize the cost of prototyping
- Minimize the cost of distortion repair work
- Develop and optimize a weld plan within the shortest time range
- Keep welding distortion within allowable tolerances
- Guarantee the best weld quality
- Control stresses in welded designs
http://depositfiles.com/files/lgmd9l3dr
ESI Welding Simulation Suite 2010.0 32bit & 64bit | 1.0 Gb
Dedicated to all engineers who manage the welding assembly of large and complex welded designs, the main objective of the simulation suite is to significantly reduce time and cost to arrive at the bill of material and at a feasible process design.
About ESI Group
ESI is a world-leading supplier and pioneer of digital simulation software for prototyping and manufacturing processes that take into account the physics of materials. ESI has developed an extensive suite of coherent, industry-oriented applications to realistically simulate a product’s behavior during testing, to fine-tune manufacturing processes in accordance with desired product performance, and to evaluate the environment’s impact on product performance. ESI’s products represent a unique collaborative and open environment for Simulation-Based Design, enabling virtual prototypes to be improved in a continuous and collaborative manner while eliminating the need for physical prototypes during product development. The company employs over 750 high-level specialists worldwide covering more than 30 countries. ESI Group is listed in compartment C of NYSE Euronext Paris
About PAM-Assembly & Weld Planner
In the early design and process evaluation phase, Weld Planner is first used to quickly evaluate numbers and positions of welds, clamping conditions, and design. While its dedicated GUI, ease of use and simulation speed meet the requirements of product and process design, Weld Planner allows finding the best possible design in the shortest possible time range.
PAM-ASSEMBLY is then used to validate the preliminary decisions taken. The complete physics of material is computed in local models, thus feeding the global model which is used to compute the overall distortion. Therefore, the computational effort is reduced from months to minutes, without losing any precision.
Version 2010 of ESI’s Welding Simulation Suite is embedded in a complete CAE environment, including dedicated meshing and post-processing tools.
http://depositfiles.com/files/oc3gcdoow
http://depositfiles.com/files/zfq0tld9g
http://depositfiles.com/files/dhxe5sdwg
http://depositfiles.com/files/2ywf9803i
بله. قطعا مطلب زیاده. خودم هم حدود70 _80 صفحه واسه تئوری گزارشکارم از اینترنت گرفتم و مرتب کردم ولی میخواستم مطالب به روز و پرمحتوا باشه و دقیقا با همین عنوان. گفتم شاید با مطالب خودم متفاوت باشه .آخه قراره بااین گزارشکار از خجالت استادم اساسی در بیام 
راهنمایی میخواستم درباره ادامه راه یا انصراف. دانشجوی ترم 2 هستم الان یهکم دارم شک میکنم برق و انتخاب میکردم یا همین رشته خودم و ؟!!!!!!!!!!!!!! بازار کار مهندسی شیمی بهتره یا برق؟ خواهشا راهنماییم کنید.
) بازار کارشم..........اگه دنبالش باشی گیر میاد
