ماشینکاری
ماشینکاری
در صنعت ایران و بین کسانی که با دستگاه های CNC سروکار دارند، یک موضوع خیلی جای بحث دارد. کدام نرم افزار را برای کار و ماشینکاری انتخاب کنیم؟ در حال حاضر احتمالا در ایران powermill از باقی نرم افزارهای CAM بیشتر جا افتاده است. علت این موضوع هم برمی گردد به 10-12 سال پیش که خودروسازان نرم افزارها را به صنعت ایران معرفی کردند. در آن موقع گرفتن فایل خروجی با فرمت G-Code از CATIA کمی سخت بود، یعنی قلق داشت. در هر حال این باب شد که خیلی ها در catia طراحی می کردند و در powermill ماشینکاری!!! این یک روند کاملا اشتباه است.
اصولا از این نرم افزار به آن یکی رفتن اشتباه است. دوستان عزیز بدانید که catia یکی از بهترین قویترین و کاربر دوست ترین محیط های ماشینکاری را دارد. در مقام مقایسه هم نسبت به powermill و بسیاری دیگر از نرم افزارهای cam حرف های زیادی برای گفتن دارد. در مقام مقایسه علمی نمی خواهم حرفی بزنم. فقط یک آماری دیروز در net دیدم، مربوط به پرفروشترین نرم افزارهای cam در دنیا. خوب اونها چون پول می دهند، حتما خیلی انتخاب های اونها معنی دار است. آمار رو می زارم در زیر. فقط حتما می دانید که catia محصول dassualt و powermill محصول dellcam است. طبق یک آمار دیگه dassualt حدود 15 ذزصد بازار دنیا در سال 2005 را داشته و dellcam بین 2.5 تا 5 درصد!!!!!
امیدوارم روزی برخی اشتباهات مرسوم در صنعت ایران که صرفا حاصل تقلید کورکورانه است، اصلاح گردد.
Relevant ranking: CAM software market leaders named by CIMdata
Manufacturing Business Technology, 6/23/2008
Version 17 of the
NC Software and Related Services Market Assessment report offered by Ann Arbor, Mich.-based
CIMdata names the worldwide computer-aided manufacturing (CAM) software market leaders for 2007, and projected those expected to be market leaders in 2008.
For 2007,
Dassault Systèmes was the market leader on the basis of both vendor revenues received and end-user payments for CAM software and services.
CNC Software was the leader on the basis of industrial seats shipped, and
Planit Holdings was the leader on the basis of industrial seats installed.
SolidCAM was named as the most rapidly growing vendor.
Notes Alan Christman, CIMdata chairman and primary author of the report, “Even though there have been recent mergers and acquisitions, the CAM software market continues to be highly fragmented and competitive," adding that there is no single vendor or small group of vendors that dominate the worldwide market.
CIMdata tracks approximately 50 CAM software vendors, and the rankings in the report each list 20 to 30 vendors, depending upon the category.
The 2007 scoop
The 2007 leading vendors on the basis of CAM software and services revenue received are as follows:
• Dassault Systèmes;
• Siemens PLM Software;
• PTC;
• Delcam;
• Planit Holdings;
• NDES (formerly Hitachi Zosen Systems);
• Tebis;
• Missler Software;
• Cimatron; and
• CNC Software.
Dassault and Siemens PLM Software were the clear leaders with double-digit market shares and a combined market share of 27.9 percent. The remaining eight vendors in the top 10 had a combined market share of 38.4 percent, and the remainder of the vendors below the top 10 had a combined market share of 33.7 percent.
The 2007 top five vendors on the basis of CAM industrial seats shipped were CNC Software, Planit Holdings, Dassault Systèmes,
Delcam, and
PTC. The seat count rankings are significantly different than the vendor revenue rankings. For example, CNC Software was listed as the leading vendor on the basis of industrial seats shipped, but only the tenth-largest on the basis of vendor revenue received. Conversely, Siemens PLM Software was the second-largest vendor on the basis of revenue received, but fell out of the top five on the basis of industrial seats shipped. The changes in rankings are primarily due to the differences in level and breadth of product and associated software pricing among the vendors.