aydin naeeni
عضو جدید
نظز شما در مورد نرم افزار piranesi چیه ؟
بسيار خوبه ، ضمن اينكه با سفارش dvd از سايتاي ايراني ميتونيد فيلماي آموزشيش رو هم داشته باشيد.نظز شما در مورد نرم افزار piranesi چیه ؟
نظز شما در مورد نرم افزار piranesi چیه ؟
AcesHigh گفت:01
02
03
COBRA, PROTECTING YOUR RIGHT TO A BETTER FUTURE
DESCRIPTION
The Complex consists of 4 commercial buildings, a garage building, a monorail station and rowhouses.
The main building is a commercial tower 40 storeys tall (proposal for 60 storeys seen at end of post)
4
5
6
http://img11.imageshack.us/img11/9316/tt10g.jpg
7
8
The skyscraper is located over the garage building. Access is found throught the garage building or through to main promenade (which counts with rampstairs, for easy of use by disabilitated people).
There is also an helipad at the northwest corner of the pier.
9
10
The building has the highest atrium in Brazil (over 140 meters tall), where visitors will be able to appreciate the internal architecture through panoramic elevators. The building top will serve as observation area
11
at the pier entrance, to the left, we have some stores which will serve the thousands of employees who will work at the Complex, besides the general population, since the complex will be open to the public.
12
Above the stores we can find a building with offices for the administration and security of the complex
At the left side for visitors, behind the stores, accessible through a secundary street, two commercial buildings of 5 floors, suspended for parking area below, will be open for buying or renting by brazilian investors and businessmen.
13
14
pending rendering
15
pending rendering
Still on the main street, visitors will soon see at their left beautiful modernist rowhouses. While the majority of them will be on sale, some will be reserved for temporary housing of executives who may be sent to oversee corporations (housed on the main tower) activities in Brazil.
16
17
At the right side of the pier, visitors will be able to walk in a nice tree shadowed path, with the sea of Guanabara Bay at their right side.
The path leads to the main promenade, where they will be able to witness a few great giant sculptures
18
19
In the same area its located the beautiful monorail station of the complex.
20
21
22
Though the complex counts with a garage building that can park more than 1000 cars in its two pavements, the prediction is that the flux of personel and visitors will fastly expand, and because of that, the monorail will connect the complex to Rio´s subway system, as well to a garage building complex that will be built in a later date.
23
pending rendering.
INTERNAL PERSPECTIVES OF THE MAIN BUILDING
01
02
03
04
(atrium)
05
pending rendering (atrium)
INTERNAL PERSPECTIVE SECUNDARY COMMERCIAL BUILDING
01
INTERNAL PERSPECTIVE STORES
01
pending rendering
INTERNAL PERSPECTIVE ROWHOUSES
01
pending rendering
BLUEPRINTS
Main building (+- 1200 sq meters of area per floor, without counting the circular hallway around the atrium)
Blueprint Secondary Commercial Building
pending rendering
Blueprints Rowhouses: over 269 sq meters, including garage but excluding open areas, like front garden, terrace and balconies. Only 6 meters of diameter.
ALTERNATIVE PROPOSAL (60 storeys)
01
02
سلام خدمت شما. توي توضيحاتي كه خود شخص نوشته بود بدون subsmooth ولي با استفاده از freescale كه يكي از دوستان اونو تو بخش پلاگيناي اسكچاپ گذاشته ساخته بودو در واقع فقط يه طبقه رو ( به صورت كامپوننت ) ساخته و اونو تكرار كرده.سلام بسیار کاره جالبی بود آقای یگانگی فکر نمی کنم در آوردن این کار بدون پلاگین Subdivide and smooth مقدور باشه منم تو نت پیداش نکردم اگه دارید لطفا share کنید ماهم استفاده کنیم
مرسی
سلام دوست عزيز ، اسكچاپ فايلهاي dxf و dwg رو ايمپورت ميكنه، فقط option رو وقت ايمپورت درست تنظيم كنيد تا مقياس كارتون درست باشه، پس از ايمپورت اسكچاپ اونو به عنوان يه كامپوننت ميشناسه و با دبل كليك روي اون ميشه ويرايشش كرد.سلام خدمت مهندس یگانگی. مهندس واسه کار تو sketch up میشه فایل dxf رو هم روش کار کرد. ولی به همون خوبی خود کار تو محیط sketch up در میاد.ممنونم اگه یه خورده توضیح بدین. با تشکر
ممنون بابت لينكها ،فقط ورژن 5 پسورد ميخواد. ممكنه بگذاريد؟سلام به همه دوستان و اساتید
PIRANESI 5 را می تونید از انجا دانلود کنید.http://rapidshare.com/files/29353873/PI5.part1.rar
http://rapidshare.com/files/29356654/PI5.part2.rar
.....
ممنون بابت لينكها ،فقط ورژن 5 پسورد ميخواد. ممكنه بگذاريد؟
این قسمت 16 پاک شده اگه کسی گرفته لطف کنه آپلود کنه ممنون می شم.سلام به همه دوستان و اساتید
PIRANESI 5 را می تونید از انجا دانلود کنید.http://rapidshare.com/files/29353873/PI5.part1.rar
http://rapidshare.com/files/29356654/PI5.part2.rar
اینهم dvd آموزش PIRANESI 5
http://rapidshare.com/files/29875050/e-ipirv5.rar
http://rapidshare.com/files/29874998/e-ipirv5.r00
http://rapidshare.com/files/29874754/e-ipirv5.r01
http://rapidshare.com/files/29875332/e-ipirv5.r02
http://rapidshare.com/files/29874798/e-ipirv5.r03
http://rapidshare.com/files/29874929/e-ipirv5.r04
http://rapidshare.com/files/29874840/e-ipirv5.r05
http://rapidshare.com/files/29875154/e-ipirv5.r06
http://rapidshare.com/files/29875076/e-ipirv5.r07
http://rapidshare.com/files/29874794/e-ipirv5.r08
http://rapidshare.com/files/29875130/e-ipirv5.r09
http://rapidshare.com/files/29875003/e-ipirv5.r10
http://rapidshare.com/files/29875027/e-ipirv5.r11
http://rapidshare.com/files/29875145/e-ipirv5.r12
http://rapidshare.com/files/29875127/e-ipirv5.r13
http://rapidshare.com/files/29875004/e-ipirv5.r14
http://rapidshare.com/files/29875219/e-ipirv5.r15
http://rapidshare.com/files/29874982/e-ipirv5.r16
http://rapidshare.com/files/29875195/e-ipirv5.r17
http://rapidshare.com/files/29875257/e-ipirv5.r18
http://rapidshare.com/files/29875118/e-ipirv5.r19
http://rapidshare.com/files/29875011/e-ipirv5.r20
http://rapidshare.com/files/29875009/e-ipirv5.r21
http://rapidshare.com/files/29875258/e-ipirv5.r22
http://rapidshare.com/files/29875102/e-ipirv5.r23
http://rapidshare.com/files/29874027/e-ipirv5.r24
بسیار خوبه ... من که حال و هوای کار رو دوست دارم.سلام به همه دوستان و مخصوصا جناب استاد
مدتی بود که نبودم و دلم برا همه تنگ شده بود، عکسی که میزارم پروژه ترم پیشمه، چون خیلی سریع انجام شد( مدلینگ و رندر در حدود 24 ساعت) برای کاور کردن ایرادات و کمی دیتیل ها با فتوشاپ این بلا رو سرش اوردم، رندر با وی ری. خوشحال میشم نظر بدین
سلام من پودیوم رو که گذاشته بودین ریختم اما توی اسکچ آپ ازم سریال نامبر میخواد . کسی میدونه سریال نامبرش چیه ؟
سلام خدمت دوستان واستادان گرامی.
میخواستم بپرسم که توی اسکچاپ میشه عکس گذاشت داخل یه قاب و رندر گرفت ؟ آخه من امتحان کردم نشد و قاب خالی رو رندر گرفت .
البته میدونم که از طریق فوتوشاپ میشه این کارو کرد اما آیا توی خود رندر نمیشه این کارو انجام داد ؟
خیلی خوب شده . طرح این ترم ما هم مجتمع مسکونی هست اگه بتونم آخر کار یه همچین رندری ازش بگیرم خیلی خوب میشه .
جناب مهندس،اگه ممکنه راجع به این رندر یه کمی توضیح بدین.چون من هر کدوم از حالت های sketchy رو انتخاب می کنم و با پودیم رندر می گیرم،اصلا به صورت sketchy نمی شه و عین حالت رندر معمولی در میاد.ترکیب رندر پودیوم با استایل:
Thread starter | عنوان | تالار | پاسخ ها | تاریخ |
---|---|---|---|---|
نمونه های مدلسازی و رندرینگ:AUTOCAD | گالری سه بعدی | 9 | ||
ا | نمونه های مدلسازی و رندرینگ:REVIT | گالری سه بعدی | 199 | |
نمونه های مدلسازی و رندرینگ:ARCHICAD | گالری سه بعدی | 163 | ||
نمونه های مدلسازی و رندرینگ:3DMAX | گالری سه بعدی | 687 | ||
M | نمونه پروژههای طراحی روشنایی با نرم افزار Dialux | گالری سه بعدی | 3 |