Journal of Materials Engineering and Performance

[zfarzan]

سلام به همه دوستان عزیز
هدف از ایجاد این تاپیک اینه که از این به بعد اگه خدا بخواد شماره های متوالی از مجله دو ماهانه Journal of Materials Engineering and Performance رو برای استفاده دوستان بذارم. امیدوارم بهتون کمک کنه.
http://www.springerlink.com/content/xg12q10237nv/?p=3fe35a0396a047adab99858b58c4ed92&pi=76
فعلاً برای شروع اولین شماره در دسترس خودم رو گذاشتم یعنی جلد 6 شماره 1 فوریه 1997

 

[reza_1364]

ممنون.

اما مشکلی هست.

طبق لینکی که از سایت springer گذاشتی این مقالات را نمیشه رایگان دانلود کرد.و نیاز به یوزر و پسوردی است که این ماهنامه را ساپورت کنه

اگر امکانش هست و دسترسی به یوزر و پسورد داری.تمام مقالات یک شماره از ماهنامه را دانلود کرده و به صورت یک pdf تهیه و سپس لینک دانلود pdf را در سایت قرار دهید.

اگه یوزر و پسورد نداری پیغام خصوصی بزن.برات میفرستم

موفق باشی

 

[zfarzan]

ممنون.

اما مشکلی هست.

طبق لینکی که از سایت springer گذاشتی این مقالات را نمیشه رایگان دانلود کرد.و نیاز به یوزر و پسوردی است که این ماهنامه را ساپورت کنه

اگر امکانش هست و دسترسی به یوزر و پسورد داری.تمام مقالات یک شماره از ماهنامه را دانلود کرده و به صورت یک pdf تهیه و سپس لینک دانلود pdf را در سایت قرار دهید.

اگه یوزر و پسورد نداری پیغام خصوصی بزن.برات میفرستم

موفق باشی

سلام
ببخشید با این که امتحان کردم که این مشکل رو نداشته باشه ولی ظاهراً اشتباه کردم دوباره همین لینک رو به صورت pdf دانلود شده میذارم

 

[zfarzan]

با سلام و خسته نباشید خدمت همه دوستان و با عذرخواهی مجدد لینک جدید جلد 6 شماره 1 از مجله journal of materials engineering and performance
http://www.mediafire.com/file/nzdom...ls Engineering and Performance Vol.6-No.1.rar

 

[reza_1364]

مقالات موجود در شماره 6:

A Study of the Chemical Composition of the Passive Film on a Ti-Mo Alloy in HCl and H2SO4
Determination of Lattice Parameters, Diffracting Crystallite Size, and Thermal Stability in Mechanically Alloyed Cu-Zn Solid Solutions
Friction and Wear of Si3N4 CeramicStainless Steel Sliding Contacts in Dry and Lubricated Conditions
Gaseous Hydrogen Embrittlement of T-250 Laser Welds
Hydrogen Embrittlement of a Ti-Strengthened 250 Grade Maraging Steel
Influence of Banded Structure on the Mechanical Properties of a High-Strength Maraging Steel
Inverse Resolution of the Heat-Transfer Equation with Internal Heat Source Application to the Quenching of Steels with Phase Transform
Investigation on Work Softening Behavior of Aluminum and Its Alloys with Iron
Ion Implantation and Diamond-Like Coatings of Aluminum Alloys
Mechanisms Governing Deformation and Damage during Elevated-Temperature Fatigue of an
Microstructural Characteristics of High-Temperature Oxidation in Nickel-Base Superalloy
Modeling and Simulation of Metal Forming Equipment
Predictive Characterization Model for Impact Cushioning Curves Predictive Characterization Model
Studies on Sensitivity of Porous Silicon Surfaces to Environmental Gases
Study on the Machinability of Resulfurized Composite Free-Cutting Steels

لینک دانلود:

دانلود
​

 

[zfarzan]

باز هم سلام
این هم از لینک جلد 6 شماره 3 از ژورنال:

Effect of Chromium Additions on the Mechanical and Physical Properties and Microstructure of Fe-Co-Ni-
Cr-Mo-C Ultra-High Strength Steelart l
Evaluation of the Nucleation and Coarsening Kinetic Behavior of the Secondary Hardening Carbide of Fe-
14Co-10Ni-1Mo.0.16C Steel at Two Chromium Levels, Using an Analytical and Modeling Approachart II
Overheating of Plasma- Nitrided Work pieces with Cylindrical Blind Holes
Sensitivity Analysis Based Preform Die Shape Design Using the Finite Element Method
Three-Dimensional Fluid Flow Model for Gas-Stirred Ladles
Rolling of T-Shaped Profiled Strip by the Satellite Mill
Powder Processing and Properties of Zircon-Reinforced AI-13.5Si-2,5Mg Alloy Composites
Microstructure and Properties of Thermomechanically Strengthened Reinforcement Bars: A Comparative
Assessment of Plain-Carbon and Low-Alloy Steel Grades
Tensile Behavior and Cyclic Creep of Continuous Fiber-Reinforced Glass Matrix Composites at Room and
Elevated Temperatures
The Tensile Response and Fracture Behavior of an AI-Zn-Mg-Cu Alloy: Influence of Temperature
A Novel Procedure for Selection of Materials in Concept Design
Prediction of Fatigue Crack Propagation Life in Notched Members under Variable Amplitude Loading​

http://www.mediafire.com/file/t4nfm...ls Engineering and Performance Vol.6-No.3.rar​

 

[zfarzan]

سلام مجدد
لینک جلد 6 شماره 4:
لینک
عنوان مقالات این شماره هم در فایل زیر موجود است:

 

[zfarzan]

سلام
عناوین مقالات موجود در جلد 6 شماره 5:

Laser ablation synthesis and characterization of nitride coatings
Structural and hardness studies of CN [FONT=Verdana,Italic]X [/FONT]/TiN composite coatings on Si (100
substrates by laser ablation method
Corrosion protection ability of plasma-deposited amorphous hydrogenated
carbon and fluorocarbon films
Nondestructive evaluation of plasma-sprayed thermal barrier coatings
Modeling the effect of coating weight on the kinetics of iron enrichment in hot
dip galvanneal coatings on interstitial-free steel sheets
Fuzzy logic modeling and control of steel rod quenching after hot rolling
Edge cracking in hot-rolled coils of semi-killed steels
Rapid solidification of copper alloys with high strength and high conductivity
Influence of porosity on fatigue cumulative damage of sintered iron
Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC
Enhanced sintering of an Fe-Ni-P coated composite powder prepared by
electroless nickel plating
A metallurgical approach to improved cavitation-erosion resistance
A study into effects of CO2 laser melting of nitrided Ti-6Al-4V alloy
Characterization of ultrafine La [FONT=Verdana,Italic]x [/FONT]Sr14 [FONT=Verdana,Italic]x [/FONT]MnO3 powder prepared by spray pyrolysis
The fatigue response and fracture behavior of a spray atomized and deposited
aluminum-silicon alloy
Superplastic deformation of SiCp/2024 Al composite fabricated by spray
atomization and codeposition
Superplastic deformation of 15 vol% SiCp/LY12 aluminum composite under an
electric field
Wear maps of Si3N4 ceramic cutting tool​

این هم از لینک این شماره:

لینک دانلود​

 

[zfarzan]

بلافاصله لینک قسمت بعد رو هم میذارم چون یهو دیدی دوباره رفتم خبری ازم نشد.
اول عناوین مقالات در جلد 6 شماره 6 یعنع آخرین شماره از این جلد(هر جلد شامل 6 شماره است):

The effect of cold rolling parameters on the recrystallization texture of nonoriented electrical steel
A new soft magnetic material for ac and dc motor applications
Recent development in grain-oriented electrical steel with low magnetostriction
Characterization of internal oxide layers in 3% Si grain-oriented steel by electrochemical methods
Localized swelling of Fe-Cr-Ni alloy rollers in high-temperature applications
Moisture ingression in honeycomb core sandwich panels
Friction and the development of hard alloy surface microstructures during wear
Influence of alloying elements on the corrosion performance of alloy 33 and alloy 24 in seawater
Development and performance of new hard and wear-resistant engineering materials
Simulation of vertical-horizontal rolling process during width reduction by full three-dimensional rigid-plastic finite element method
Laser spot welding and efficiency consideration
Some reactive processing aspects of high-temperature aluminides Nb3Al and RuAl
Accelerated electrospark deposition and the wear behavior of coatings
Effects of porous carbon on sintered Al-Si-Mg matrix composites
Low-melting-point titanium-base brazing alloys—part 1: Characteristics of two-,three-, and four-component filler metals
Low-melting-point titanium-base brazing alloys—part 2: Characteristics of brazing Ti-21Ni-14Cu on Ti-6Al-4v substrate​

لینک دانلود​

 

[zfarzan]

جلد 7 شماره 1
عناوین مقالات:

Tribological Behavior of Ni/Sn Metallic Multilayer Composites
Solutionizing Effects during Corrosive Wear in 6061 Aluminum and Composites
Wear Resistance Properties of Austempered Ductile Iron
Wear and Wear Mechanism Simulation of Heavy-Duty Engine Intake Valve and Seat Inserts
Processing and Response of Aluminum-Lithium Alloy Composites Reinforced
with Copper-Coated Silicon Carbide Particulates
Description of a Mathematical Model of Deformability for the Process of Drawing Tubes on a Fixed Mandrel
Protection of Carbon Steel against Hot Corrosion Using Thermal Spray Si- and Cr-Base Coatings
Surface Nanocrystallization of 310S Stainless Steel and Its Effect on Oxidation Behavior
Mechanical Properties of As-Cast and Heat-Treated ZA-27 Alloy/Short Glass Fiber Composites
In Situ Investigation of the Effect of Hydrogen on the Plastic Deformation Ahead of the Crack Tip and the Crack Propagation for 0.15C-1.5Mn-0.17V-0.012N Steel
Notch-Sensitive Fracture Behavior of a Silicon Carbide Fiber-Reinforced Glass-Ceramic at Elevated Temperatures
High-Temperature Degradation and Protection of Ferritic and Austenitic Steels in Steam Generators
Interfacial Stress in a Carbon-to-Metal Bond Joint under Thermal Shock Loading
Sliding Wear Response of a Leaded-Tin Bronze: Influence of the Counterface Material Characteristics
Microstructure and Property Characterization of a Modified Zinc-Base Alloy
and Comparison with Bearing Alloys​

لینک دانلود​

 

[zfarzan]

سلام مجدد بعد از یه مدت تاخیر جلد 7 شماره 2 :
عناوین مقالات این شماره:

Recent advances in the hole drilling method for residual stress measurement
Residual stress effects in stress-corrosion cracking
A numerical model to investigate the role of residual stresses on the mechanical behavior of Al/Al2O3 particulate composites
Fatigue crack/residual stress field interactions and their implications for damage-tolerant design
An internal-variable constitutive model for semisolid slurries at high solid fractions
The effect of Zr on the low-cycle fatigue behavior of NiAl at 1000 K
Effects of laser surface melting on the pitting resistance of sensitized nitrogenbearing type 316L stainless steel
Low stress abrasive wear behavior of a hardfaced steel
Development of clad boiler tubes extruded from bimetallic centrifugal castings
Manufacturing and recycling of A380Al/SiCp) composites
HSLA-100 steels: Influence of aging heat treatment on microstructure and properties
Laser glazing of plasma-sprayed zirconia coatings
Effect of austenitizing conditions on the impact properties of an alloyed austempered ductile iron of initially ferritic matrix structure​

لینک دانلود

 

[zfarzan]

دوباره سلام
بدون توضیح اضافه لینک جلد 7 شماره 3 از ژورنال:
عناوین مقالات این شماره:

Surface characterization methods— XPS,TOF-SIMS, and SAM a complimentary ensemble of tools​

High resolution electron microscopy characterization of nitrides of iron and iron alloys​

The use of XPS, FTIR, SEM/EDX, contact angle, and AFM in the characterization of coatings​

Microstructure and hardness of hollow cathode discharge ion-plated titanium nitride film​

The complementary nature of x-ray photoelectron spectroscopy and angle-resolved x-ray diffraction Part I: Background and theory​

The complementary nature of x-ray photoelectron spectroscopy and angle-resolved x-ray diffraction part II: Analysis of oxides on dental alloys​

A comparative study of tribological behavior of plasma and D-gun sprayed coatings under different wear modes​

Boundary element methods for the analysis of crack growth in the presence of residual stress fields​

Influence of laser hardening and resulting microstructure on fatigue properties of carbon steels​

Location and geometry of defects in composite laminates from infrared images​

Microstructure of heavily deformed magnesium-lithium composites containing steel fibers​

The preparation of TiAl-based intermetallics from elemental powders through a two-step pressureless sintering process​

Mechanical behavior of Al-Al2O3 MMC manufactured by PM techniques part I—scheme I processing parameters​

On the laser quenching of the groove of the piston head in large diesel engines​

The effect of segregation on the austemper transformation and toughness of ductile irons​

A mixture of pure gases that produce maximum heat transfer characteristics for quenching​

لینک دانلود​

 

[zfarzan]

سلام
این هم از عناوین جلد 7 شماره 4 :

Estimation of early fatigue damage in heat treated En-8 gradesteel
A high Cr-Mo alloy iron
Graphitization in high carbon commercial steels
Warm compression tests of aluminum alloy
Study of dynamic explicit analysis in sheet metal forming processes using faster punch velocity and mass scaling scheme
Computer simulation helps increase life of impeller in alumina hydrate precipitation from 2 to 8 years
Comparison of phosphor bronze metal sheet produced by twin roll casting and horizontal continuous casting
Microstructure and properties of quenched-and-aged plates produced from a copper-bearing HSLA steel
Roof-crush strength improvement using rigid polyurethane foam
A theoretical and experimental analysis of variances in weld bead morphologies
Microstructural study of a mechanically alloyed ODS superalloy
Assessment of techniques for characterizing the surface quality of ground silicon nitride
Creep data analyses of a columnar-grained nickel-base superalloy by conventional and Β-envelope methods
Deformation behavior of cadmium telluride stressed at elevated
temperatures
​

لینک دانلود​

 

[zfarzan]

و این هم عناوین جلد 7 شماره 5 :

Penetration in spot GTA welds during centrifugation
Tribological behavior and wear mechanisms of TiN/TiCN/TiN multilayer coatings
The effect of Al2O3 addition on the milling behavior of NiAl powder
Influence of roll and solution treatment processing on shape memory effect of Fe-14Mn-5Si-9Cr-5Ni alloy
Characterization of seven power-generating turbine rotors using microscopy-based techniques
Response of some cast zinc-base alloys (37.5% Al) comprised of nickel/silicon under different tensile loading conditions
Heat transfer coefficient on external mold surface at high pressure and application to metal-matrix composite casting
Effect of processing parameters on the elastic deflection of P/M Ni-Fe36Ni bimetal strips during heating
Hardness, microstructure and surface characterization of laser gas nitrided commercially pure titanium using high power CO2 laser
Preparation and processing of rare earth chalcogenides
Hot and cold rolling of high nitrogen Cr-Ni and Cr-Mn austenitic stainless steels
Structure degradation of 25Cr35Ni heat-resistant tube associated with surface coking and internal carburization
Application of positron annihilation spectroscopy to study recovery and recrystallization of commercial pure Al and Al-1 wt% Mn alloys
Low-cycle impact fatigue of SiCw/7475Al composite
The effects of artificial aging on the microstructure and fracture toughness of Al-Cu-Li alloy 2195
​

لینک دانلود​

 

[zfarzan]

آخرین شماره از جلد 7 یعنی شماره 6 :

Inverse optimal design of the radiant heating in materials processing and manufacturing
The effects of a CeO2 coating on the corrosion parameters of type 304 stainless steel
AR-aging as a new approach for enhanced results
A study of the effect of polystyrene sulfonation on the performance of terephthaloyl chloride-dihydroxydiphenyl sulfone copolymer/polystyrene system
Aging characteristics of short glass fiber reinforced ZA-27 alloy composite materials
Prediction of laser-induced thermal damage of fiber mat and fiber MatUD reinforced polymers
Effect of heating cycle on the structure of Ag films deposited over porcelain substrates
A general approach based on constrained parameter-optimization for the implicit representation of information concerning welding processes
Effect of rolling in the intercritical region on the tensile properties of dual-phase steel
Crack growth in a welded microalloyed steel under sulfide stress cracking conditions
Synthesis of γ-TiAl based alloy by mechanical alloying and reactive hot isostatic pressing
Influence of climatic conditions on the carbonation of quicklime
Modified falex testing: A tool for understanding the compound layer capabilities
The resistance to cavitation erosion of CrMnN stainless steels
Relating tensile, bending, and shear test data of asphalt binders to pavement performance
The corrosion behavior of TiN coated and uncoated incoloy 800 alloy
Weldability and toughness evaluation of pressure vessel quality steel using the shielded metal arc welding (SMAW) process​

لینک دانلود​