>>>مراجع لاتین مهندسی مکانیک و علوم وابسته<<<

[hadi azna]

Fracture of Polymers, Composites and Adhesives

Fracture of Polymers, Composites and Adhesives

Fracture of Polymers, Composites and Adhesives

Fracture of Polymers, Composites and Adhesives
By J. G. Williams, A. Pavan





Publisher: Pergamon Press Inc
Number Of Pages: 468
Publication Date: 2000-10-01
ISBN-10 / ASIN: 0080437109
ISBN-13 / EAN: 9780080437101
Binding: Hardcover



Hardbound. This book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.


http://mihd.net/mcbzljh/0080437109.zip
or
http://rapidshare.com/files/165934458/0080437109.zip
or
http://rapidshare.com/files/165605798/0080437109.zip​

 

[hadi azna]

Mechanical Properties of Ceramics and Composites: Grain and Particle Effects

Mechanical Properties of Ceramics and Composites: Grain and Particle Effects

Mechanical Properties of Ceramics and Composites: Grain and Particle Effects

​

Mechanical Properties of Ceramics and Composites: Grain and Particle Effects
By Roy W. Rice





Publisher: CRC
Number Of Pages: 695
Publication Date: 2000-05-15
ISBN-10 / ASIN: 0824788745
ISBN-13 / EAN: 9780824788742
Binding: Hardcover





A comprehensive review, evaluation, and summary of the dependence of mechanical properties on grain and particle parameters of monolithic ceramics and ceramic composites. Emphasizing the critical link between fabrication and ceramic performance, the book covers the grain dependence of monolithic properties and the dependence of ceramic, composite properties on grain and particulate parameters. It includes theoretical and conceptual background, pertinent models, experimental results, a data review, discussion, and a summary or recommendations. Illustrations feature microstructural details while graphs plot data on material hardness, compressive strength, and other pivotal variables.


http://www.filefactory.com/file/ba3117
or
http://rapidshare.com/files/92799786/Mechanical.Properties.of.Ceramics.and.Composites.rar​

 

[hadi azna]

Monomers, Polymers and Composites from Renewable Resources

Monomers, Polymers and Composites from Renewable Resources

Monomers, Polymers and Composites from Renewable Resources

Monomers, Polymers and Composites from Renewable Resources
By Mohamed Naceur Belgacem, Alessandro Gandini





Publisher: Elsevier Science
Number Of Pages: 560
Publication Date: 2008-06-06
ISBN-10 / ASIN: 0080453163
ISBN-13 / EAN: 9780080453163
Binding: Hardcover




The progressive dwindling of fossil resources, coupled with the drastic increase in oil prices, have sparked a feverish activity in search of alternatives based on renewable resources for the production of energy.


Given the predominance of petroleum- and carbon-based chemistry for the manufacture of organic chemical commodities, a similar preoccupation has recently generated numerous initiatives aimed at replacing these fossil sources with renewable counterparts. In particular, major efforts are being conducted in the field of polymer science and technology to prepare macromolecular materials based on renewable resources. The concept of the bio-refinery, viz. the rational exploitation of the vegetable biomass in terms of the separation of its components and their utilisation as such, or after suitable chemical modifications, is thus gaining momentum and considerable financial backing from both the public and private sectors.
This collection of chapters, each one written by internationally recognised experts in the corresponding field, covers in a comprehensive fashion all the major aspects related to the synthesis, characterization and properties of macromolecular materials prepared using renewable resources as such, or after appropriate modifications. Thus, monomers such as terpenes and furans, oligomers like rosin and tannins, and polymers ranging from cellulose to proteins and including macromolecules synthesized by microbes, are discussed with the purpose of showing the extraordinary variety of materials that can be prepared from their intelligent exploitation.


Particular emphasis has been placed on recent advances and imminent perspectives, given the incessantly growing interest that this area is experiencing in both the scientific and technological realms.


- Discusses bio-refining with explicit application to materials
- Replete with examples of applications of the concept of sustainable development
- Presents an impressive variety of novel macromolecular materials


http://rapidshare.com/files/131042546/0080453163.rar​

 

[hadi azna]

Friction Science and Technology: From Concepts to Applications, 2nd edition

Friction Science and Technology: From Concepts to Applications, 2nd edition

Friction Science and Technology: From Concepts to Applications, 2nd edition

Friction Science and Technology: From Concepts to Applications, Second Edition ( Mechanical Engineering)
By Peter J. Blau





Publisher: CRC
Number Of Pages: 440
Publication Date: 2008-10-20
ISBN-10 / ASIN: 142005404X
ISBN-13 / EAN: 9781420054040
Binding: Hardcover




From the history of friction studies to the evolution of measurement instruments, Friction Science and Technology provides a broad, multidisciplinary overview of the field. Expanded coverage in this edition includes the effects of engine conditioning on lubricant frictional characteristics and the role of friction in automotive and truck brakes, including brake testing methods, and the friction of footware and biomaterials. The text updates ASTM standards and offers a case study that describes how a new standard for piston ring and liner friction was developed. Other new topics include ultra-low friction films, friction stir welding, friction stir processing, and friction drilling.

http://rapidshare.com/files/159389690/142005404X.rar
or
http://ifile.it/oqreaz3/142005404x.rar​

 

[hadi azna]

Practical Guide To Designed Experiments: A Unified Modular Approach

Practical Guide To Designed Experiments: A Unified Modular Approach

Practical Guide To Designed Experiments: A Unified Modular Approach

Practical Guide To Designed Experiments: A Unified Modular Approach
Mechanical Engineering
By Paul D. Funkenbusch


Publisher: CRC
Number Of Pages: 224
Publication Date: 2004-11-12
ISBN-10 / ASIN: 0824753887
ISBN-13 / EAN: 9780824753887
Binding: Hardcover





Many engineers and scientists have receive little or no training in designed experiments, and any courses that are available tend to be either abstract and divorced from practical considerations or strictly practical-lacking the rigor and depth necessary for true, long-term understanding. Practical Guide to Designed Experiments: A Unified Modular Approach bridges that gap, presenting the essential material in a manner that permits rapid application to practical problems but also provides the structure and understanding necessary for long-term growth. It covers two-level and three-level full and fractional factorial design and also includes the L12 and L18 designs popularized by Taguchi. The author describes the role and selection of the system response for measurement and optimization and discusses both conventional and Taguchi approaches, noting their similarities and differences. Clearly written and well organized, this text shows how the components of experimental design fit and work together. Offering an abundance of examples, case studies, and practice problems, it is highly suited to anyone with a basic science or engineering background but little or no previous exposure to matrix experiments or other elements of planned experimentation.


http://ifile.it/yfrntji/0824753887.zip
or
http://www.filefactory.com/file/8110e7/n/0824753887_zip​

 

[hadi azna]

Heat Transfer in Single and Multiphase Systems (Mechanical Engineering)

Heat Transfer in Single and Multiphase Systems (Mechanical Engineering)

Heat Transfer in Single and Multiphase Systems

(Mechanical Engineering)

Review
All chapters are well written with good solved examples and practice problems at the end of each chapter. . . Overall, a good work for academic institutions and handy reference for practicing engineers. ^BSumming Up: Recommended.
-P.C. Singh, formerly, Purdue University
an exceptionally well written text It explains the complicated phenomena of heat transfer and phase change through detailed descriptions of these physical processes, giving the reader a deep understanding of the meaning of the mathematical equations describing them includes a comprehensive chapter on current techniques used in CFD codes an excellent resource for both researchers and the practicing engineer.
-Dale Roach, University of New Brunswick, Canada


concise and unified [The] first sections provide excellent knowledge for undergraduate engineeringpractical problems in multiphase flow bridge the gap between theory and practice in a clear and logical manner. a valuable reference for practicing engineers.
-Javed Abolfazli Esfahani, Ferdowsi Universityof Mashhad, Iran


a valuable reference source for engineers dealing with any heat transfer problem in academia and industry.
-James P. Brill, University of Tulsa, USA


Book Description
Heat transfer problems in multiphase systems arise in a range of applications and disciplines, including heat exchangers, power generation, and materials processing. For the first time in one book, Heat Transfer in Single and Multiphase Systems covers the fundamentals of heat transfer and addresses all types of multiphase systems. This unified treatment allows readers to better appreciate the analogies, similarities, and common themes of multiphase systems. For each class of multiphase flow, the author discusses terminology, flow classifications, two-phase flow maps, and a range of solution techniques for multiphase problems, including differential, integral, and computation methods.





Hardcover: 640 pages
Publisher: CRC; 1 edition (August 29, 2002)
Language: English
ISBN-10: 0849310326
ISBN-13: 978-0849310324


http://www.mediafire.com/?9tojm1xp2bt
or
http://rapidshare.com/files/77583211/htsms0849310326.rar
or
http://rapidshare.com/files/77576595/HTSMS0849310326.rar.html
or
http://mihd.net/4×17ao
​

 

[hadi azna]

Mechanical Wear Fundamentals and Testing, Second Edition, Revised and Expanded

Mechanical Wear Fundamentals and Testing, Second Edition, Revised and Expanded

Mechanical Wear Fundamentals and Testing, Second Edition, Revised and Expanded
(Mechanical Engineering )

​

By Raymond G. Bayer
Publisher: CRC
Number Of Pages: 402
Publication Date: 2004-04-22
ISBN-10 / ASIN: 0824746201
ISBN-13 / EAN: 9780824746209
Binding: Hardcover





Written by a tribological expert with more than thirty years of experience in the field, this Second Edition compiles an extensive range of graphs, tables, micrographs, and drawings to illustrate wear, friction, and lubrication behavior in modern engineering applications. This volume promotes a clear understanding of wear testing methodologies for avoidance and resolution of deterioration and weakening in specific engineering designs. The comprehensive new edition describes more than 20 different phenomenological wear tests and over 10 operational wear tests and introduces a methodology devised by the author for selecting, developing, and conducting wear tests for specific applications.


http://rapidshare.com/files/137807747/0824746201.rar​

 

[hadi azna]

Vibration Monitoring, Testing, and Instrumentation (Mechanical Engineering Series)

Vibration Monitoring, Testing, and Instrumentation (Mechanical Engineering Series)

Vibration Monitoring, Testing, and Instrumentation
(Mechanical Engineering Series)

Vibration Monitoring, Testing, and Instrumentation
(Mechanical Engineering Series)

By Clarence W. de Silva


Publisher: CRC
Number Of Pages: 696
Publication Date: 2007-04-19
ISBN-10 / ASIN: 1420053191
ISBN-13 / EAN: 9781420053197
Binding: Hardcover




Controlling a system’s vibrational behavior, whether for reducing harmful vibrations or for enhancing useful types, is critical to ensure safe and economical operation as well as longer structural and equipment lifetimes. A related issue is the effect of vibration on humans and their environment. Achieving control of vibration requires thorough understanding of system behavior, and Vibration Monitoring, Testing, and Instrumentation provides a convenient, thorough, and up-to-date source of tools, techniques, and data for instrumenting, experimenting, monitoring, measuring, and analyzing vibration in a variety of mechanical and structural systems and environments. Drawn from the immensely popular Vibration and Shock Handbook, each expertly crafted chapter of this book includes convenient summary windows, tables, graphs, and lists to provide ready access to the important concepts and results. The authors give equal emphasis to the theoretical and practical aspects, supplying methodologies for analyzing shock, vibration, and seismic behavior. They thoroughly review instrumentation and testing methods such as exciters, sensors, and LabVIEW® tools for virtual instrumentation as well as signal acquisition, conditioning, and recording. Illustrative examples and case studies accompany a wide array of industrial and experimental techniques, analytical formulations, and design approaches. The book also includes a chapter on human response to vibration. Vibration Monitoring, Testing, and Instrumentation supplies a thorough understanding of the concepts, tools, instruments, and techniques you need to know before the design process begins.


http://rapidshare.com/files/139260542/Vibration_Monitoring__Testing__and_Instrumentation.rar
or
http://rapidshare.com/files/139303115/Vib_Mon.rar
​

 

[hadi azna]

Ermüdungsrisse: Erkennen, sicher beurteilen, vermeiden

Ermüdungsrisse: Erkennen, sicher beurteilen, vermeiden

Ermüdungsrisse: Erkennen, sicher beurteilen, vermeiden

خستگی ناگهانی
شناخت،ارزیابی و جلوگیری از آن
(زبان آلمانی)

Ermüdungsrisse: Erkennen, sicher beurteilen, vermeiden
Pages: 256 | PDF | Vieweg+Teubner; Auflage: 1 (28. Oktober 2008) | ISBN; 3834802921 | 4 MB
Kurzbeschreibung
Das Fachbuch Ermüdungsrisse beschäftigt sich mit der Auslegung von Bauteilen nach Festigkeitskriterien sowie der Analyse von Schäden durch Risswachstum bei Belastung mit konstanter Amplitude und bei Betriebsbelastung. Die Ermittlung und Darstellung bruchmechanischer Werkstoffkennwerte und -kennfunktionen wird behandelt.
Selbsterklärende Abbildungen zu charakteristischen Anwendungsbeispielen aus der Praxis visualisieren überzeugend die dargestellten Sachverhalte.
Über den Autor
Prof. Dr.-Ing. Hans Albert Richard leitet die Fachgruppe Angewandte Mechanik und lehrt Technische Mechanik an der Universität PaderbornDr.-Ing. Manuela Sander ist Oberingenieurin in der Fachgruppe Angewandte Mechanik und liest u. a. das Gebiet Betriebsfestigkeit an der Universität Paderborn.
rapidshare.com
or
http://uploaded.to/file/t799op​

 

[hadi azna]

Roloff / Matek: Maschinenelemente. Formelsammlung

Roloff / Matek: Maschinenelemente. Formelsammlung

Roloff / Matek: Maschinenelemente. Formelsammlung

اجزاء ماشین
(زبان : آلمانی)

Roloff / Matek: Maschinenelemente. Formelsammlung
German | PDF | 293 Seiten | Vieweg+Teubner; Auflage: 8(Juli 2006) | ISBN: 3834801194 | ~5,5 MB
�ber 700 Berechnungsformeln zu Maschinenelementen sind in �bersichtlicher Anordnung zusammengestellt. Ausf�hrliche Hinweise sowie Bilder und Grafiken lassen die Zusammenh�nge der Formelinhalte erkennen.

rapidshare.com_Roloff_Matekk_Formelsammlung_Maschinenelemente
or
http://sharingmatrix.com/file/38227/Roloff_Matekk_Formelsammlung_Maschinenelemente.rar​

 

[hadi azna]

Materials Handbook - Fifteenth Edition

Materials Handbook - Fifteenth Edition

Materials Handbook - Fifteenth Edition

Materials Handbook - Fifteenth Edition
Publisher: McGraw-Hill Professional | Pages: 1115 | 2002-06-18 | ISBN 007136076X | PDF | 4 MB
The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances –more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material.
Introduced in 1929 and often known simply as “Brady’s,” this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students.
Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys.
Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels.
New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
DOWNLOAD​

 

[hadi azna]

Adhesive Bonding: Science, Technology and Applications

Adhesive Bonding: Science, Technology and Applications

Adhesive Bonding: Science, Technology and Applications

Robert D. Adams, “Adhesive Bonding”
Publisher: Woodhead Publishing Ltd | 2005-04-04 | ISBN 1855737418 | PDF | 560 pages | 7.9 MB
The hardest part of writing about the history of adhesive bonding is deciding where to start, since it is impossible to know for certain when or where adhesive materials were first used. Although there is significant written and archaeological evidence to suggest that humans have been using adhesive products for thousands of years, in their drive to make objects more decorous, stronger, more useful or simply cheaper, there does not appear to have been a single `Eureka’ moment when their usefulness was first discovered. Instead, the introduction of adhesives is likely to have been a gradual process, beginning with the application of naturally `sticky’ products before moving on to the preparation of simple adhesives, possibly by-products from cooking.
Depositfiles.com
Uploading.com
Letitbit.com​

 

[hadi azna]

Konstruktionsfibel SolidWorks 2008: Beispiele aus dem Maschinen- und Vorrichtungsbau

Konstruktionsfibel SolidWorks 2008: Beispiele aus dem Maschinen- und Vorrichtungsbau

Konstruktionsfibel SolidWorks 2008: Beispiele aus dem Maschinen- und Vorrichtungsbau

طراحی با SolidWorks 2008
مثال هایی از طراحی جیگ و فیکسچر

Konstruktionsfibel SolidWorks 2008: Beispiele aus dem Maschinen- und Vorrichtungsbau
Pages: 160 | PDF | Vieweg+Teubner; Auflage: 1 (12. September 2008) | ISBN: 383480519X | 10 MB
Kurzbeschreibung
Dieses Lehrbuch beschreibt an einem Beispiel sehr ausführlich und verständlich die Konstruktion einer Biegevorrichtung. Damit wird der User Schritt für Schritt in die Umgebung von SolidWorks eingeführt.
Viele ausgeführte Praxisbeispiele aus dem Maschinen- und Vorrichtungsbau ermöglichen einen Überblick und geben Anregungen für die eigene Konstruktionslösung.
Buchrückseite
Dieses Fachbuch besteht aus zwei Teilen. Der erste Teil beschreibt an einem Niederzugspanner sehr ausführlich, anschaulich und verständlich den Konstruktionsprozess. Damit wird der User Schritt für Schritt in die Umgebung von SolidWorks eingeführt. 52 ausgeführte Vorrichtungen aus der Praxis für unterschiedliche Zwecke bilden den zweiten Teil dieses Fachbuches und geben Anregungen für die eigene Konstruktionsarbeit. Auf der beigelegten DVD finden sich viele ausgeführte Praxisbeispiele aus dem Maschinen- und Vorrichtungsbau, die einen guten Überblick geben und das Entwickeln von eigenen Ideen unterstützen. Die Darstellungen des Buches basieren auf der Student-Edition 2008 von SolidWorks.
Über den Autor
Dipl.-Ing. Dieter Eh war langjährig in der Industrie als Fertigungsplaner tätig, Dipl.-Ing. Heinrich Krahn war früher in der Konstruktion bei Volkswagen tätig und ist heute Autor mehrerer Fachbücher.
rapidshare.com
orhttp://freebooksource.com/news_mgr/destroy/325762
http://uploaded.to/file/o2gtjx​

 

[hadi azna]

Verdichter für Turbo-Flugtriebwerke

Verdichter für Turbo-Flugtriebwerke

Verdichter für Turbo-Flugtriebwerke

توربو کمپرسورها برای موتورهای هواپیما
(زبان آلمانی)

Verdichter für Turbo-Flugtriebwerke
Pages: 712 | PDF | Springer, Berlin; Auflage: 1 (23. Februar 2009) | ISBN: 3540343733 | 31 MB
Kurzbeschreibung
Turboverdichter für Flugtriebwerke haben viele spezielle Eigenschaften, die für die praktische technische Entwicklung, Auslegung und Konstruktion von Bedeutung sind. Diese Kenntnisse werden in diesem Buch zusammengestellt. Für das Verständnis der vom Gesamttriebwerk ausgehenden Beschränkungen der Verdichter-Auslegungsparameter und der vom Triebwerk aufgeprägten Arbeitsbedingungen der Verdichter unter verschiedenen Flug- bzw.
Betriebsbedingungen werden die Entwicklung der wichtigen Auslegungs- und Betriebsparameter, die dabei zu beachtenden gegenseitigen Abhängigkeiten und die zu empfehlenden Kombinationen der Auslegungsparameter behandelt. Grundlage dafür sind umfassende Datensammlungen aus der industriellen Entwicklung. Behandelt werden alle in Flugtriebwerken vorkommenden Verdichterkomponenten und Verdichterbauweisen, einstufige Fans ziviler Nebenstromtriebwerke und Hochdruckverdichter von Zweikreis-/Mehrwellentriebwerken bis hin zu Axial-/Radialverdichtern und zweistufige Radialverdichter von Gasgeneratoren kleiner Wellenleistungstriebwerke. Besondere Aufmerksamkeit wird der analytischen Beherrschung der Situation bei aerodynamisch und mechanisch erregten Schaufelschwingungen und der dabei verfügbaren analytischen Methodik gewidmet, die als Folge der Entwicklungstendenzen bei Axialverdichtern zunehmend komplexer werden.
Über den Autor
Dr. Hubert Grieb studierte an der Technischen Hochschule Stuttgart Maschinenbau und promovierte dort 1975 über ein Thema aus der Verdichteraerodynamik. Von 1954 bis 1969 war er bei Daimler Benz tätig. Er wechselte dann zur MTU München in die Leitung der Verdichterentwicklung und war Leiter der Technischen Projektierung. Zuletzt leitete er dort den Fachbereich Analytik
(Aerodynamik, Mechanik, Projekte).
rapidshare.com
http://freebooksource.com/news_mgr/destroy/325769



​

 

[hadi azna]

HCCI and CAI Engines for the Automotive Industry

HCCI and CAI Engines for the Automotive Industry

HCCI and CAI Engines for the Automotive Industry

H. Zhao, “HCCI and CAI Engines for the Automotive Industry”
Woodhead Publishing Ltd | 2007-08-30 | ISBN: 1845691288 | 544 pages | PDF | 5,8 MB
Preface:
Controlled Auto-Ignition (CAI) and Homogeneous Charge Compression
Ignition (HCCI) combustion are radically different from the conventional
spark ignition (SI) combustion in a gasoline engine and compression ignition
(CI) diffusion combustion in a diesel engine. The combination of a diluted
and premixed fuel and air mixture with multiple ignition sites throughout the
combustion chamber eliminates the high combustion temperature zones and
prevents the production of soot particles, hence producing ultra-low NOx
and particulate emissions.
The use of lean, or more often diluted, air/fuel
mixture with recycled burned gases permits unthrottled operation of a CAI/
HCCI gasoline engine, thus yielding higher engine efficiency and better fuel
economy than SI combustion. Therefore, CAI/HCCI combustion represents
for the first time a combustion technology that can simultaneously reduce
both NOx and particulate emissions from a diesel engine and has the capability
of achieving simultaneous reduction in fuel consumption and NOx emissions
from a gasoline engine.
Based on these promises, the interest in CAI/HCCI combustion exploded
at the turn of the new millennium and has since grown so much that the
HCCI session has consistently been the largest session in the world’s largest
annual gathering of automotive engineers, the annual SAE Congress in Detroit,
for the last five years. Each year, scores of papers are published at a number
of international conferences and in various journals. It would be a daunting
task to read every publication in this field. In addition, it presents a particular
challenge for someone to plan working in this field or for someone to make
a management decision on CAI/HCCI technology. In the meantime, the
research and development efforts in this field over the last ten years have
reached a stage that not only has better understanding of the underlying
physical and chemical process in CAI/HCCI combustion been achieved but
also several dominant and promising means have emerged for the adoption
of CAI/HCCI combustion in automotive applications. It is therefore timely
that the large volume of technical information should be made available in
an organised way so that the description of the fundamental processes, insights
on technical issues, and identification of future research and development
can be found between one set of covers.
uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/194570443/HCCI_CAI.rar
or
http://rapidshare.com/files/194585279/1845691288_HCCI_and_CAI.rar​

 

[hadi azna]

Operation and Maintenance of Large Turbo-Generators

Operation and Maintenance of Large Turbo-Generators

Operation and Maintenance of Large Turbo-Generators

Geoff Klempner, Isidor Kerszenbaum, “Operation and Maintenance of Large Turbo-Generators
(IEEE Press Series on Power Engineering)”
Wiley-IEEE Press | 2004-08-11 | ISBN: 0471614475 | 584 pages | PDF | 12.9 MB
The comprehensive guide for the operation and maintenance of large turbo-generators
Operation and Maintenance of Large Turbo-Generators is the ultimate resource for operators and inspectors of large utility and industrial generating facilities who deal with multiple units of disparate size, origin, and vintage. It offers the complete scope of information regarding operation and maintenance of all types of turbine-driven generators built in the world.
Based on the authors’ combined sixty years of generating station and design work experience, the information presented in the book is designed to inform the reader about actual machine operational problems and failure modes that occur in generating stations and other types of facilities. Readers will find very detailed coverage of:
* Design and construction of generators and auxiliary systems
* Generator operation, including interaction with the grid
* Monitoring, diagnostics, and protection of turbo-generators
* Inspection practices, including stator, rotor, and auxiliary systems
* Ideas for improving plant reliability and reducing costs and electrical failures
* Maintenance testing, including electrical and nondestructive examination
Operation and Maintenance of Large Turbo-Generators comes filled with photos and graphs, commonly used inspection forms, and extensive references for each topic. It is an indispensable resource for anyone involved in the design, construction, protection, operation, maintenance, and troubleshooting of large generators in generating stations and industrial power facilities. The book is also an excellent learning tool for students, consultants, and design engineers.
Download: 12.9 MB, rar’d PDF
uploaded.to
OR
uploading.com
OR
rapidshare.com
OR
megaupload.com​

 

[hadi azna]

Bosch Automotive Handbook

Bosch Automotive Handbook

Bosch Automotive Handbook

Bosch - Automotive Handbook on CD-ROM
Robert Bosch GMBH | ISBN: 0837610974 | 2004. | CD-ROM | ?? pages | 44,7 MB
The bestselling Bosch Automotive Handbook is now available on an interactive CD-ROM. The definitive encyclopedia of automotive topics includes sections on Fuel Filters, Internal-Combustion Engines, Electric Drive Units and Vehicle Information Systems, along with many other topics in an intuitive and user friendly interface.

Language: English, German, French
# Easy installation
# Menu guided operation
# Table of contents and keyword index with over 3000 entries
# Comprehensive search functions
# Electronic picture englargement for more than 600 pictures
# Calculation function for over 700 formulas
The definitive encyclopaedia of automotive topics includes sections on Fuel Filters, Internal-Combustion Engines, Electric Drive Units and Vehicle Information Systems, along with many other topics in an intuitive and user friendly interface.
This electronic version has a number of extra advantages for the user, for instance a search function with more than 3,000 entries, or the ability to copy and export figures and diagrams into other applications.
The CD also features easy installation menu guided operation, electronic enlargement for more than 600 pictures and a formula generator, specially developed for this CD, enabling on-line calculations to be made using over 700 formulas.

(Please note this CD doesn’t work with Vista)
http://rapidshare.com/files/92434973/Bosch-Automotive_Handbook.part1.rar
http://rapidshare.com/files/92428239/Bosch-Automotive_Handbook.part2.rar
http://rapidshare.com/files/92434974/Bosch-Automotive_Handbook.part3.rar
http://rapidshare.com/files/92434975/Bosch-Automotive_Handbook.part4.rar
http://rapidshare.com/files/92434976/Bosch-Automotive_Handbook.part5.rar
Password: http://rapidshare.com/users/JUG1SZ




​

 

[hadi azna]

The Bicycle Wheel

The Bicycle Wheel

The Bicycle Wheel

Jobst Brandt, “The Bicycle Wheel”
Avocet | 1993-06 | ISBN: 0960723668 | 150 pages | PDF | 4,3 MB
Review
Opinionated and Priceless,
Jobst Brandt is an engineer who has been a consultant to the bicycle industry for many years, having been involved in the creation of Avocet’s line of road tires, among other products. Those who have corresponded with him or read his posts on rec.bicycling know him as an opinionated, seemingly gruff fellow who does not suffer fools lightly. Quite a reputation.
But what Jobst is probably best known for is this book, The Bicycle Wheel. In it, he demolishes myths, and gives actual engineering data to support his contentions about bicycle wheels materials and construction. He tells you why butted spokes are better and longer lasting than straight gauge spokes, and why tying and soldering spokes doesn’t make a wheel any stronger (and why it was nonetheless a useful thing for track racers to do). He explains why radial spoking doesn’t really make for a rougher ride, as some claim, and he gives actual figures on elongation and strain to back up his claims And he teaches you how to build good bicycle wheels, too.
This is a book for any serious bicycle rider. If you choose to build your own wheels, Brandt will teach you to that. If you buy your wheels, Brandt will teach you to spec and maintain them. And if you’re simply interested in better understanding the function and physics of bicycle wheels, he’ll teach you that as well. Not a bad deal for one small volume.
uploading.com
or
depositfiles.com
or
uploadbox.com ​

 

[hadi azna]

Primer on Flat Rolling

Primer on Flat Rolling

Primer on Flat Rolling

Primer on Flat Rolling
Publisher: Elsevier | Pages: 368 | 2007-08-13| ISBN 0080453198 | PDF | 9 MB
Primer for Flat Rolling is the outcome of over three decades of involvement with the rolling process. It is based on the author’s yearly set of lectures, delivered to engineers and technologists working in the rolling metal industry. The essential and basic ideas involved in designing and analysis of the rolling process are presented.
The three components of flat rolling: the mill, the rolled metal and their interface are discussed and illustrated in detail. New processes are also mentioned; flexible rolling and accumulative roll-bonding. The last chapter contains problems, the solutions of which will aid in appreciating the complexities of flat rolling.
The aim is to introduce, the engineers, technologists and students, to the background of this field to ease their planning and analyzing of processes.
* Includes an instructors manual
* Evaluates the predictive capabilities of mathematical models
* Assignments and their solutions are included
DOWNLOAD
MIRROR​

 

[hadi azna]

Engineering Science, 5 Ed

Engineering Science, 5 Ed

Engineering Science, 5 Ed

W. Bolton, “Engineering Science, 5 Ed”
Newnes | 2006-08-22 | ISBN: 0750680830 | 448 pages | PDF | 16,9 MB
Engineering Science is a comprehensive textbook suitable for all vocational and pre-degree courses. Taking a generic approach, the essential scientific principles engineering students need for their studies are presented topic by topic. Unlike the majority of texts available on this subject, Bill Bolton goes beyond the core science to include the mechanical, electrical and electronic principles needed in the majority of courses.
A concise and accessible text is supported by numerous worked examples and problems, with a complete Answer Section at the back of the book. Now in its fifth edition, the text has been fully updated in line with the current BTEC National syllabus and includes a grid mapping the chapters to the BTEC units. The breadth of coverage means this fifth edition will also prove an essential reference for students embarking on HNC and Foundation Degrees, who require a general introduction to this subject area.
New for this edition is online lecturer support available from http://textbooks.elsevier.com and featuring:
. Key points, definitions and equations from the book for use as handouts
. Multiple Choice Questions
. Answers to the Multiple Choice Questions
. PowerPoint slides featuring essential illustrations per topic area for use in lectures or as handouts
· Generic topic-based approach - ensures suitability for all vocational and pre-degree level students
· Coverage of all the mechanical, electrical and electronic principles within one volume provides a comprehensive exploration of scientific principles within engineering
· Fully up to date with the latest Level 3 syllabus requirements

uploading.com

depositfiles.com

http://rapidshare.com/files/185958780/EnginSc.zip​

 

[smeal2]

Book Description: ​

A practical approach to the computational methods used to solve real-world dynamics problems ​

Computational dynamics has grown rapidly in recent years with the advent of high-speed digital computers and the need to develop simulation and analysis computational capabilities for mechanical and aerospace systems that consist of interconnected bodies. ​

Computational Dynamics, Second Edition offers a full introduction to the concepts, definitions, and techniques used in multibody dynamics and presents essential topics concerning kinematics and dynamics of motion in two and three dimensions. ​

Skillfully organized into eight chapters that mirror the standard learning sequence of computational dynamics courses, this Second Edition begins with a discussion of classical techniques that review some of the fundamental concepts and formulations in the general field of dynamics. Next, it builds on these concepts in order to demonstrate the use of the methods as the foundation for the study of computational dynamics. Finally, the book presents different computational methodologies used in the computer-aided analysis of mechanical and aerospace systems. ​

Each chapter features simple examples that show the main ideas and procedures, as well as straightforward problem sets that facilitate learning and help readers build problem-solving skills. ​

Clearly written and ready to apply, Computational Dynamics, Second Edition is a valuable reference for both aspiring and practicing mechanical and aerospace engineers.​

Publisher: Wiley-Interscience
Number Of Pages: 520
Publication Date: 2001-02-26
Sales Rank: 714510
ISBN / ASIN: 0471371440
EAN: 9780471371441
Binding: Hardcover
Manufacturer: Wiley-Interscience
Studio: Wiley-Interscience ​

http://rapidshare.com/files/9767170/Shabana.pdf

http://mihd.net/5tpby4​

hi dear sir
pls give the password

 

[hadi azna]

hi dear sir
pls give the password

dear friend
this book is without password. you must download this book from this server http://rapidshare.com/files/9767170/Shabana.pdf
​

 

[antonino69]

Eshbach's Handbook of Engineering Fundamentals

Eshbach's Handbook of Engineering Fundamentals

Eshbach's Handbook of Engineering Fundamentals 5th Edition

Editorial Reviews

Product Description
With specialization now the norm in engineering, students preparing for the FE and PE exams and practitioners going outside their specialty need a general reference with material across a number of disciplines. Since 1936, Eshbach's Handbook of Engineering Fundamentals has been the bestselling reference covering the general principles of engineering; today, it's more relevant than ever. For this Fifth Edition, respected author Myer Kutz fully updates and reshapes the text, focusing on the basics, the important formulas, tables, and standards necessary for complete and accurate knowledge across engineering disciplines. With chapters on mathematical principles, physical units and standards as well as the fundamentals of mechanical, aerospace, electrical, chemical, and industrial engineering, this classic reference is more relevant than ever to both practicing engineers and students studying for the FE and PE exams.

Product Details

* Hardcover: 1320 pages
* Publisher: Wiley; 5 edition (January 27, 2009)
* Language: English
* ISBN-10: 0470085789
* ISBN-13: 978-0470085783
* Product Dimensions: 9.4 x 7.4 x 2.1 inches
PDF rar no pass
http://rapidshare.com/files/205232054/Eshbach_s_Handbook_of_Engineering_Fundamentals.rar

Enjoy

 

[hadi azna]

Mechanics of Composite Materials, Second Edition

Mechanics of Composite Materials, Second Edition

Mechanics of Composite Materials, Second Edition

Mechanics of Composite Materials, Second Edition
Publisher: CRC | Pages: 496 | 2005-11-02 | ISBN 0849313430 | PDF | 13 MB
1997, Dr. Kaw introduced the first edition of Mechanics of Composite Materials, receiving high praise for its comprehensive scope and detailed examples. He also introduced the groundbreaking PROMAL software, a valuable tool for designing and analyzing structures made of composite materials. Updated and expanded to reflect recent advances in the field, this Second Edition retains all of the features-logical, streamlined organization, thorough coverage, and self-contained treatment-that made the first edition a bestseller.
The book begins with a question-and-answer style introduction to composite materials, including updated material on new applications. The remainder of the book discusses macromechanical analysis of both individual lamina and laminate materials; micromechanical analysis of lamina including elasticity based models; failure, analysis, and design of laminates; and a new chapter devoted to symmetrical and nonsymmetrical beams.


DOWNLOAD

or

http://rapidshare.com/files/199645986/mechanics_of_composite_materials_0849313430.pdf​

 

[hadi azna]

Engineering Design Principles

Engineering Design Principles

Engineering Design Principles

Engineering Design Principles
Publisher: Butterworth | Pages: 168 | 1999-05-28 | ISBN 0340598298 | PDF | 8 MB
Good design is the key to the manufacture of successful commercial products. It encompasses creativity, technical ability, communication at all levels, good management and the abiltity to mould these attributes together. There are no single answers to producing a well designed product. There are however tried and tested principles which, if followed, increase the likely success of any final product.
This book introduces these principles to engineering students and professional engineers. Drawing on historical and familiar examples from the present, the book provides a stimulating guide to the principles of good engineering design. The comprehensive coverage of this text makes it invaluable to all undergraduates requiring a firm foundation in the subject.
Introduction to principles of good engineering design like: problem identification, creativity, concept selection, modelling, design management and information gathering
Rich selection of historical and familiar present examples
DOWNLOAD
or
http://rapidshare.com/files/206147647/0340598298.zip​

 

[hadi azna]

Modern Physical Metallurgy and Materials Engineering

Modern Physical Metallurgy and Materials Engineering

Modern Physical Metallurgy and Materials Engineering

Modern Physical Metallurgy and Materials Engineering
Publisher: Butterworth | 448 pages | December 8, 1999 | ISBN: 0750645644 | PDF 7 MB
For many years, various editions of Smallman’s Modern Physical Metallurgy have served throughout the world as a standard undergraduate textbook on metals and alloys. In 1995, it was rewritten and enlarged to encompass the related subject of materials science and engineering and appeared under the title Metals & Materials: Science, Processes, Applications offering a comprehensive amount of a much wider range of engineering materials.
Coverage ranged from pure elements to superalloys, from glasses to engineering ceramics, and from everyday plastics to in situ composites, Amongst other favourable reviews, Professor Bhadeshia of Cambridge University commented: “Given the amount of work that has obviously gone into this book and its extensive comments, it is very attractively priced. It is an excellent book to be recommend strongly for purchase by undergraduates in materials-related subjects, who should benefit greatly by owning a text containing so much knowledge.”
DOWNLOAD​

 

[hadi azna]

Engineering Vibration Analysis with Application to Control Systems

Engineering Vibration Analysis with Application to Control Systems

Engineering Vibration Analysis with Application to Control Systems

Engineering Vibration Analysis with Application to Control Systems
Publisher: Butterworth | Pages: 448 | 1995-06 | ISBN 034063183X | PDF | 11 MB
Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics.
Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion.
All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.
DOWNLOAD
http://freebooksource.com/news_mgr/destroy/345982​

 

[hadi azna]

Practical Process Control

Practical Process Control

Practical Process Control

Practical Process Control
Publisher: Butterworth | Pages: 168 | 1998-06-26 | ISBN 0340705906 | PDF | 19 MB
This book introduces process control to engineers and technicians unfamiliar with control techniques, providing an understanding of how to actually apply control in a real industrial environment. It avoids analytical treatment of the numerous statistical process control techniques to concentrate on the practical problems involved. A practical approach is taken, making it relevant in virtually all manufacturing and process industries.
There is currently no information readily available to practising engineers or students that discusses the real problems and such material is long overdue.
An indispensable guide for all those involved in process control
Includes equipment specification, troubleshooting, system specification and design
Provided with guidelines of HOW TO and HOW NOT TO install process control
DOWNLOAD
or
http://freebooksource.com/news_mgr/edit/345940
http://rapidshare.com/files/206148532/0340705906.zip​

 

[hadi azna]

Advanced Thermodynamics Engineering (Repost)

Advanced Thermodynamics Engineering (Repost)

Advanced Thermodynamics Engineering

Advanced Thermodynamics Engineering
Publisher: CRC | Pages: 439 | 2001-08-31 | ISBN 0849325536 | PDF | 14 MB
Although there are a number of satisfactory advanced thermodynamics texts on the market, virtually all of them take a rigorous theoretical and mathematical approach to the subject. Engineering students need a more practical approach-one that offers physical explanations along with the mathematical relation and equations-so they can readily apply them to real world problems. Advanced Thermodynamics Engineering fills that need.
The authors take a down-to-earth approach that lays a strong conceptual foundation and provides simple, physical explanations for thermodynamic processes and the practical evaluation of thermodynamic systems. They employ a phenomenological approach throughout the book and include more than 150 engineering examples. The authors stress applications throughout the book, illustrate availability concepts, and emphasize the use of two conservation and two balance equations. They include an abundance of figures, exercises, and tables, plus a summary of important formulae and a summary of each chapter, ideal for quick reference or review. The authors have also developed spreadsheet software that covers many of the applications presented. This text eliminates the need for students to wade through the abstract generalized concepts and mathematical relations that govern thermodynamics. You can now offer them the perfect text for understanding the physics of thermodynamic concepts and apply that knowledge in the field: Advanced Thermodynamics Engineering.

DOWNLOAD
or
http://rapidshare.com/files/205680705/0849325536.rar​

 

[hadi azna]

Flight Performance of Fixed and Rotary Wing Aircraft

Flight Performance of Fixed and Rotary Wing Aircraft

Flight Performance of Fixed and Rotary Wing Aircraft

Flight Performance of Fixed and Rotary Wing Aircraft
Publisher: Butterworth | Pages: 600 | 2006-05-10 | ISBN 0750668172 | PDF | 14 MB
Filippone presents an accurate, detailed, well structured book that guides the reader through nearly every aspect of aircraft performance. The performance of fixed wing, rotary wing and V/STOL aircraft is considered, with the book covering both beginner and advanced topics with comprehensive derivations throughout. Unusually for technical textbooks the book is very well written and a joy to read.
The book an ideal tool for aerospace/aeronautical undergraduates and for working engineers who need a flight performance reference. Much like Timoshenko’s structures textbooks and Stroud’s mathematics textbooks I see this book becoming a stalwart addition to any library.
DOWNLOAD
or
http://rapidshare.com/files/205736926/0750668172.rar​