درخواست های مرتبط با | استانداردهای صنایع نفت، گاز و پتروشیمی
- شروع کننده موضوع P O U R I A
- تاریخ شروع
سلام خسته نباشید
DIN 620
DIN 620
سلام
استاندارد DIN620 رو اگه دارين لينكشو واس دانلود بذارين..
ممنون
hamid.lotfi@rocketmail.com
DIN 620
سلام
استاندارد DIN620 رو اگه دارين لينكشو واس دانلود بذارين..
ممنون
hamid.lotfi@rocketmail.com
ezatpanahi
عضو جدید
ezatpanahi
عضو جدید
loghmanniyari
عضو جدید
استاندارد های ایزو برای رسم pfd و p&id
استاندارد های ایزو برای رسم pfd و p&id
سلام دوستان
در مورد استاندارد های ایزو برای رسم pfd و p&id می خواستم
اگه کسی از دوستان اطلاعاتی در این مورد داره ممنون میشم بنده رو کمک کنه.
استاندارد های ایزو برای رسم pfd و p&id
سلام دوستان
در مورد استاندارد های ایزو برای رسم pfd و p&id می خواستم
اگه کسی از دوستان اطلاعاتی در این مورد داره ممنون میشم بنده رو کمک کنه.
reza.izadi
عضو جدید
يه مقدار از استاندارد هاي astm . iso مي خواستم.مي توني كمك كني.
astm d(430 & 638 & 648 & 695 & 696 & 732 & 747 & 790 & 792 & 813 & 864 & 995 & 1044 & 1238 & 1505 & 1525 & 2990 )
, astm c117
iso(75 . 75-1 . 75-2 . 178 . 306 . 527-1 . 899 . 1133 . 2577 . 3358 )
ممنون
astm d(430 & 638 & 648 & 695 & 696 & 732 & 747 & 790 & 792 & 813 & 864 & 995 & 1044 & 1238 & 1505 & 1525 & 2990 )
, astm c117
iso(75 . 75-1 . 75-2 . 178 . 306 . 527-1 . 899 . 1133 . 2577 . 3358 )
ممنون
نياز به B30.5
نياز به B30.5
با سلام
نياز به استانداردهاي B30.5 2007 و B30.2 دارم
اگر از دوستان كسي آدرس دارد لطفا راهمنائي كند.
نياز به B30.5
با سلام
نياز به استانداردهاي B30.5 2007 و B30.2 دارم
اگر از دوستان كسي آدرس دارد لطفا راهمنائي كند.
For ASME B30.10-2005 Edition, Link is:
http://ifile.it/eyklb85
http://ifile.it/eyklb85/ASME%20B30.10-2005.pdf
For ASME B30.16-2007 Edition, Link is:
http://ifile.it/n6rb7xh
http://ifile.it/n6rb7xh/ASME%20B30.16-2007.pdf
For ASME B30.20-2003, Link is:
http://ifile.it/pwaxmfv
http://ifile.it/pwaxmfv/ASME%20B30.20-2003.pdf
NFPA13
http://ifile.it/zu7ivpk
http://ifile.it/eyklb85
http://ifile.it/eyklb85/ASME%20B30.10-2005.pdf
For ASME B30.16-2007 Edition, Link is:
http://ifile.it/n6rb7xh
http://ifile.it/n6rb7xh/ASME%20B30.16-2007.pdf
For ASME B30.20-2003, Link is:
http://ifile.it/pwaxmfv
http://ifile.it/pwaxmfv/ASME%20B30.20-2003.pdf
NFPA13
http://ifile.it/zu7ivpk
Hamid Reza.M
مدیر بازنشسته
shirinasarehpour
عضو جدید
سلام من مدت هاست گه دنبال این استاندارد هستم امکان داره به من کمک کنید:
API Rp 1626:
Storing&Handling ethanol and Gasoline-Ethanol blends at distribution terminals and service stations.
قبلا از همکار شما متشکرم
API Rp 1626:
Storing&Handling ethanol and Gasoline-Ethanol blends at distribution terminals and service stations.
قبلا از همکار شما متشکرم
Hamid Reza.M
مدیر بازنشسته
reza.ajami
عضو جدید
درخوست استاندارد
درخوست استاندارد
سلام
DIN EN 13674-1
DIN EN 14811
BS EN 10045
ممنون
درخوست استاندارد
سلام
DIN EN 13674-1
DIN EN 14811
BS EN 10045
ممنون
درخواست دانلود استاندارد asme b31.8
درخواست دانلود استاندارد asme b31.8
سلام
ضمن عرض خسته نباشید . اینجانب نیاز به دانلود استاندارد asme b31.8 دارم اگر مقدور است لطفا به آدرس behroikd@yahoo.com اینجانب ارسال نمایید . باتشکر
درخواست دانلود استاندارد asme b31.8
سلام
ضمن عرض خسته نباشید . اینجانب نیاز به دانلود استاندارد asme b31.8 دارم اگر مقدور است لطفا به آدرس behroikd@yahoo.com اینجانب ارسال نمایید . باتشکر
API “Manual of Petroleum Measurement Standards” Chapter 1 to 21:
Chapter 1: Manual of Petroleum Measurement Standards – 2nd Edition 1994.
Chapter 2: Tank Calibration.
Section 2A: Measure and Calibration of Upright Cilindrical Tanks by the Manual Tank Strapping Method – 1st Edition 1995.
Section 2B: Calibration of Upright Cilindrical Tanks using the Optical Reference Line Method Measure – 1st Edition 2002.
Correction Gauge Tables for Incrustation – 2nd Edition 1993.
Method for Measurement and Calibration of Horizontal Tanks – 1st Edition 1965.
Method for Measurement and Calibration of Spheres and Spheroids – 1st Edition 1965.
Method for Measurement and Calibration of Tank Cars – 1st Edition 1965.
Method for Liquid Calibration of Tanks – 1st Edition 1966.
Chapter 3: Tank Gauging.
Section 1A: Standard Practice for the Manual Gauging of Petroleum and Petroleum Products – 1st Edition 1994.
Section 1B: Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tank by Automatic Tank Gauging – 1st Edition 1992.
Section 2: Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars – 1st Edition 1995.
Section 3: Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging – 1st Edition 1996.
Chapter 4: Proving System.
Section 1: Introduction – 2nd Edition 1998.
Section 2: Conventional Pipe Provers – 1st Edition 1998.
Section 3: Small Volume Provers – 1st Edition 1998.
Section 4: Tank Provers – 2nd Edition 1998.
Section 5: Master-Meter Provers – 1st Edition 1988.
Section 6: Pulse Interpolation – 2nd Edition 1999.
Section 7: Field Standard Test Measures – 2nd Edition 1998.
Section 8: Operation of Proving Systems – 1st Edition 1995.
Chapter 5: Metering
Section 1: General Consideration for Measurement by Meters – 3rd Edition 1995.
Section 2: Measurement of Liquid Hydrocarbons by Displacement Meters – 2nd Edition 1987.
Section 3: Measurement of Liquid Hydrocarbons by Turbine Meters – 4th Edition 2002.
Section 4: Accessory Equipment for Liquid Meters – 3rd Edition 1995.
Section 5: Fidelity and Security of Flow Measurement Pushed-Data Transmission Systems – 1st Edition 1982.
Section 6: Measurement of Liquid Hydrocarbons by Coriolis Meters – 1st Edition 1992.
Chapter 6: Metering Assembling
Section 1: Lease Automatic Custody Transfer (LACT) Systems – 2nd Edition 1996.
Section 2: Loading – Rack and Tank-Truck Metering Systems for non-LPG Product – 2nd Edition 1994.
Section 3: Service Station Metered Fuel – Dispending Systems – 2nd Edition 1994.
Section 4: Metering Systems for Aviation Fuelling Facilities – 1st Edition 1996.
Section 5: Metering System for Loading and Unloading Marine Bulk Carries – 2nd Edition 1994.
Section 6: Pipeline Metering System – 2nd Edition 1996.
Chapter 7: Temperature Determination – 1st Edition 2001.
Section 1: Static Temperature Determination Using Mercury-in-Glass Tank Thermometers – 1st Edition 1991.
Section 2: Dynamic Temperature Determination – 2nd Edition 1995.
Section 3: Static Temperature Determination Using Portable Electronic Thermometers – 1st Edition 1985.
Section 4: Static Temperature Determination Using Fixed Automatic Tank Thermometers – 1st edition 1993
Chapter 1: Manual of Petroleum Measurement Standards – 2nd Edition 1994.
Chapter 2: Tank Calibration.
Section 2A: Measure and Calibration of Upright Cilindrical Tanks by the Manual Tank Strapping Method – 1st Edition 1995.
Section 2B: Calibration of Upright Cilindrical Tanks using the Optical Reference Line Method Measure – 1st Edition 2002.
Correction Gauge Tables for Incrustation – 2nd Edition 1993.
Method for Measurement and Calibration of Horizontal Tanks – 1st Edition 1965.
Method for Measurement and Calibration of Spheres and Spheroids – 1st Edition 1965.
Method for Measurement and Calibration of Tank Cars – 1st Edition 1965.
Method for Liquid Calibration of Tanks – 1st Edition 1966.
Chapter 3: Tank Gauging.
Section 1A: Standard Practice for the Manual Gauging of Petroleum and Petroleum Products – 1st Edition 1994.
Section 1B: Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tank by Automatic Tank Gauging – 1st Edition 1992.
Section 2: Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars – 1st Edition 1995.
Section 3: Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging – 1st Edition 1996.
Chapter 4: Proving System.
Section 1: Introduction – 2nd Edition 1998.
Section 2: Conventional Pipe Provers – 1st Edition 1998.
Section 3: Small Volume Provers – 1st Edition 1998.
Section 4: Tank Provers – 2nd Edition 1998.
Section 5: Master-Meter Provers – 1st Edition 1988.
Section 6: Pulse Interpolation – 2nd Edition 1999.
Section 7: Field Standard Test Measures – 2nd Edition 1998.
Section 8: Operation of Proving Systems – 1st Edition 1995.
Chapter 5: Metering
Section 1: General Consideration for Measurement by Meters – 3rd Edition 1995.
Section 2: Measurement of Liquid Hydrocarbons by Displacement Meters – 2nd Edition 1987.
Section 3: Measurement of Liquid Hydrocarbons by Turbine Meters – 4th Edition 2002.
Section 4: Accessory Equipment for Liquid Meters – 3rd Edition 1995.
Section 5: Fidelity and Security of Flow Measurement Pushed-Data Transmission Systems – 1st Edition 1982.
Section 6: Measurement of Liquid Hydrocarbons by Coriolis Meters – 1st Edition 1992.
Chapter 6: Metering Assembling
Section 1: Lease Automatic Custody Transfer (LACT) Systems – 2nd Edition 1996.
Section 2: Loading – Rack and Tank-Truck Metering Systems for non-LPG Product – 2nd Edition 1994.
Section 3: Service Station Metered Fuel – Dispending Systems – 2nd Edition 1994.
Section 4: Metering Systems for Aviation Fuelling Facilities – 1st Edition 1996.
Section 5: Metering System for Loading and Unloading Marine Bulk Carries – 2nd Edition 1994.
Section 6: Pipeline Metering System – 2nd Edition 1996.
Chapter 7: Temperature Determination – 1st Edition 2001.
Section 1: Static Temperature Determination Using Mercury-in-Glass Tank Thermometers – 1st Edition 1991.
Section 2: Dynamic Temperature Determination – 2nd Edition 1995.
Section 3: Static Temperature Determination Using Portable Electronic Thermometers – 1st Edition 1985.
Section 4: Static Temperature Determination Using Fixed Automatic Tank Thermometers – 1st edition 1993
Chapter 8: Sampling
Section 1: Standard Practice for Manual Sampling of Petroleum and Petroleum Products – 3rd Edition 1995.
Section 2: Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products – 2nd Edition 1995.
Section 3: Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products – 1st Edition 1995.
Section 4: Manual Sampling and Handling of Fuels for Volatility Measurement – 1st Edition 1995.
Chapter 9: Density
Section 1: Hydrometer Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products – 1st Edition 1992.
Section 2: Pressure Hydrometer Test Method for Density or Relative Density – 1st Edition 1987.
Section 3: Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products – 1st Edition 1994.
Chapter 10: Sediment and Water
Section 1: Determination of Sediment in Crude Oils and Fuel Oils by the Extraction Method – 1st Edition 1993.
Section 2: Determination of Water in Crude Oil by Distillation – 1st Edition 1993.
Section 3: Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) – 1st Edition 1981.
Section 4: Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) – 2nd Edition 1988.
Section 5: Determination of Water in Petroleum Products and Bituminous Materials by Distillation – 2nd Edition 1994.
Section 6: Determination of Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedures) – 2nd Edition 1995.
Section 7: Standard Test Method for Water in Crude Oil by Karl Fischer Titration (Potentiometer – 1st Edition 1996.
Section 8: Standard Test Method for Sediment in Crude Oil by Membrane Filtration – 1st Edition 1993.
Section 9: Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration – 1st Edition 1993.
Chapter 11: Physical Properties Data - Viscosity – 5th Edition 1992.
Chapter 11.2.1-Compressibility Factors for Hydrocarbons: 0-90º API Gravity and 638-1 074 Kilograms per Cubic Metre Range – 1st Edition 1984.
Chapter 11.2.1 M-Compressibility Factors for Hydrocarbons: 0-90º API Gravity and 638-1 074 Kilograms per Cubic Metre Range – 1st Edition 1984.
Chapter 11.2.2-Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60°F/600F) and - 50°F to 140°F Metering Temperature – 2nd Edition 1986.
Chapter 1 1.2.2M-Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15ºC) and - 46°C to 60°C Metering Temperature – 1st Edition 1986.
Chapter 11.2.3M-Water Calibration of Volumetric Provers – 1 st Edition 1984.
Section 4: Properties of Reference Materials
Part 1—Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers - 1st Edition 2003.
Section 1: Standard Practice for Manual Sampling of Petroleum and Petroleum Products – 3rd Edition 1995.
Section 2: Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products – 2nd Edition 1995.
Section 3: Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products – 1st Edition 1995.
Section 4: Manual Sampling and Handling of Fuels for Volatility Measurement – 1st Edition 1995.
Chapter 9: Density
Section 1: Hydrometer Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products – 1st Edition 1992.
Section 2: Pressure Hydrometer Test Method for Density or Relative Density – 1st Edition 1987.
Section 3: Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products – 1st Edition 1994.
Chapter 10: Sediment and Water
Section 1: Determination of Sediment in Crude Oils and Fuel Oils by the Extraction Method – 1st Edition 1993.
Section 2: Determination of Water in Crude Oil by Distillation – 1st Edition 1993.
Section 3: Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) – 1st Edition 1981.
Section 4: Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) – 2nd Edition 1988.
Section 5: Determination of Water in Petroleum Products and Bituminous Materials by Distillation – 2nd Edition 1994.
Section 6: Determination of Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedures) – 2nd Edition 1995.
Section 7: Standard Test Method for Water in Crude Oil by Karl Fischer Titration (Potentiometer – 1st Edition 1996.
Section 8: Standard Test Method for Sediment in Crude Oil by Membrane Filtration – 1st Edition 1993.
Section 9: Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration – 1st Edition 1993.
Chapter 11: Physical Properties Data - Viscosity – 5th Edition 1992.
Chapter 11.2.1-Compressibility Factors for Hydrocarbons: 0-90º API Gravity and 638-1 074 Kilograms per Cubic Metre Range – 1st Edition 1984.
Chapter 11.2.1 M-Compressibility Factors for Hydrocarbons: 0-90º API Gravity and 638-1 074 Kilograms per Cubic Metre Range – 1st Edition 1984.
Chapter 11.2.2-Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60°F/600F) and - 50°F to 140°F Metering Temperature – 2nd Edition 1986.
Chapter 1 1.2.2M-Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15ºC) and - 46°C to 60°C Metering Temperature – 1st Edition 1986.
Chapter 11.2.3M-Water Calibration of Volumetric Provers – 1 st Edition 1984.
Section 4: Properties of Reference Materials
Part 1—Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers - 1st Edition 2003.
Chapter 12: Calculation of Petroleum Quantities
Section 2: Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters – 1st 1981.
Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors
Part 1 - Introduction – 2nd Edition 1995.
Part 2 - Measurement Tickets – 2nd Edition 1995.
Part 3 - Proving Reports – 1st Edition 1998.
Part 4 - Calculation of Base Prover Volumes
by the Waterdraw Method – 1st Edition 1997.
Chapter 13: Statistical Aspects of Measuring and Sampling
Section 1: Statistical Concepts and Procedures in Measurement – 1st edition 1985.
Section 2: Methods of Evaluating Meter Proving Data – 1st Edition 1994.
Chapter 14: Natural Gas Fluids Measurement
Section 1: Collecting and Handling of Natural Gas Samples for Custody Transfer – 5th Edition 2005.
Section 3: Concentric, Square – Edged Orifice Meters
Part 4 - Background, Development, Implementation Procedures and Subroutine Documentation – 3rd Edition 1992.
Section 4: Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumen – 1st Edition 1991.
Section 5: Calculation of Gross Heating Value, Specific Gravity, and Compressibility of Natural Gas Mixtures from Compositional Analysis – 2nd Edition 2002.
Section 6: Continuous Density Measurement – 2nd Edition 1991.
Section 7: Mass Measurement of Natural Gas Liquids – 2nd Edition 1995.
Section 8: Liquefied Petroleum Gas Measurement – 2nd Edition 2002.
Chapter 15: Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries – 2nd Edition 1980.
Chapter 16: Measurement of Hydrocarbon Fluids by Weight or Mass
Section 2: Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging – 1st Edition 1994.
Chapter 17: Marine Measurement
Section 9: Vessel Experience Factor - IP Hydrocarbon Management HM 49 – 1st Edition 2005.
Chapter 18: Custody Transfer
Section 1: Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck – 2nd Edition 1997.
Chapter 19: Evaporative Loss Measurement.
Section 1: Evaporative Loss From Fixed Roof Tanks – 2nd Edition 1991.
Section 1D: Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1—Evaporative Loss From Fixed Roof Tanks – 1st Edition 1993.
Section 2: Evaporative Loss From Floating Roof Tanks-1st Edition 1997.
Section 4: Recommended Practice for Speciation of Evaporative Losses – 1st Edition 1994.
Chapter 20: Allocation Measurement
Section 1: Allocation Measurement – 1st Edition 1993.
Chapter 21: Flow Measurement Using Electronic Metering Systems
Section 1: Electronic Gas Measurement – 1st Edition 1993.
Section 2: Electronic Liquid Volume Measurement Using Positive
Displacement And Turbine Meters – 1st Edition 1998.
Section 2: Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters – 1st 1981.
Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors
Part 1 - Introduction – 2nd Edition 1995.
Part 2 - Measurement Tickets – 2nd Edition 1995.
Part 3 - Proving Reports – 1st Edition 1998.
Part 4 - Calculation of Base Prover Volumes
by the Waterdraw Method – 1st Edition 1997.
Chapter 13: Statistical Aspects of Measuring and Sampling
Section 1: Statistical Concepts and Procedures in Measurement – 1st edition 1985.
Section 2: Methods of Evaluating Meter Proving Data – 1st Edition 1994.
Chapter 14: Natural Gas Fluids Measurement
Section 1: Collecting and Handling of Natural Gas Samples for Custody Transfer – 5th Edition 2005.
Section 3: Concentric, Square – Edged Orifice Meters
Part 4 - Background, Development, Implementation Procedures and Subroutine Documentation – 3rd Edition 1992.
Section 4: Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumen – 1st Edition 1991.
Section 5: Calculation of Gross Heating Value, Specific Gravity, and Compressibility of Natural Gas Mixtures from Compositional Analysis – 2nd Edition 2002.
Section 6: Continuous Density Measurement – 2nd Edition 1991.
Section 7: Mass Measurement of Natural Gas Liquids – 2nd Edition 1995.
Section 8: Liquefied Petroleum Gas Measurement – 2nd Edition 2002.
Chapter 15: Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries – 2nd Edition 1980.
Chapter 16: Measurement of Hydrocarbon Fluids by Weight or Mass
Section 2: Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging – 1st Edition 1994.
Chapter 17: Marine Measurement
Section 9: Vessel Experience Factor - IP Hydrocarbon Management HM 49 – 1st Edition 2005.
Chapter 18: Custody Transfer
Section 1: Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck – 2nd Edition 1997.
Chapter 19: Evaporative Loss Measurement.
Section 1: Evaporative Loss From Fixed Roof Tanks – 2nd Edition 1991.
Section 1D: Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1—Evaporative Loss From Fixed Roof Tanks – 1st Edition 1993.
Section 2: Evaporative Loss From Floating Roof Tanks-1st Edition 1997.
Section 4: Recommended Practice for Speciation of Evaporative Losses – 1st Edition 1994.
Chapter 20: Allocation Measurement
Section 1: Allocation Measurement – 1st Edition 1993.
Chapter 21: Flow Measurement Using Electronic Metering Systems
Section 1: Electronic Gas Measurement – 1st Edition 1993.
Section 2: Electronic Liquid Volume Measurement Using Positive
Displacement And Turbine Meters – 1st Edition 1998.
API TECHNICAL DATA BOOK – Chapter 6: Density – 4th Edition 1983.
[/QUOTE]با سلام ، من دنبال ورژن جدید استاندارد زیر هستم ، اگر کسی میتونه بهم کمک کنه ممنون میشم
ASTM Designation :E645-91
Standard Test Method for Efficacy of Microbiocides used in cooling systems
البته من این استاندارد رو دارم ولی دنبال ورژن جدیدش هستم
یعنی این شماره مدنظرمن هست
ASTM E645 - 07
جهت اطلاعات بیشتر به لینک زیر مراجعه کنید
http://www.astm.org/Standards/E645.htm
ASTM Designation :E645-91
Standard Test Method for Efficacy of Microbiocides used in cooling systems
البته من این استاندارد رو دارم ولی دنبال ورژن جدیدش هستم
یعنی این شماره مدنظرمن هست
ASTM E645 - 07
جهت اطلاعات بیشتر به لینک زیر مراجعه کنید
http://www.astm.org/Standards/E645.htm
m.baharyeh
عضو جدید
من نیاز به این استاندارد دارم ممنون میشم کمک کنید
AS NZS 3598
AS NZS 3598
reza.ajami
عضو جدید
سلام من استاندارد iso 10993 رو میخوام که 18 section داره و راجع به biocompatibility هستش
ممنون
reza.ajami
عضو جدید
iso 10993
iso 10993
سلام من استاندارد iso 10993 رو میخوام که 18 section داره و راجع به biocompatibility هستش
ممنون
iso 10993
سلام من استاندارد iso 10993 رو میخوام که 18 section داره و راجع به biocompatibility هستش
ممنون
استانداردهای SSPC
استانداردهای SSPC
نیاز فوری به استاندارهای زیر راهنمایی بفرمایید
و مجموعه استانداردهای SSPC
ممنون
استانداردهای SSPC
نیاز فوری به استاندارهای زیر راهنمایی بفرمایید
SSPC - THE SOCIETY FOR PROTECTIVE COATING
SSPC-PA1: Paint Application Specification Nº 1 – Shop, Field, And Maintenance Painting Of Steel – 2000.
SSPC-VIS 2: Standard Method Of Evaluating Degree Of Rusting On Painted Steel Surfaces – 2000.
SSPC-SP2: Surface Preparation Specification For Nº 2 - Hand Tool Cleaning – 2000.
SSPC-SP3: Surface Preparation Specification For Nº 3 - Power Tool Cleaning – 2000.
SSPC-SP5: White Metal Blast Cleaning – 2000.
SSPC-SP6: Commercial Blast Cleaning – 2000.
SSPC-SP7: Brush-Off Blast Cleaning – 2000.
SSPC-SP10: Near White Metal Blast Cleaning – 1999.
SSPC-SP11: Power Tool Cleaning To Bare Metal – 2000.
SSPC-SP12: Surface Preparation And Cleaning Of Metals By Waterjetting Prior To Recoating – 2000.
SSPC-PA1: Paint Application Specification Nº 1 – Shop, Field, And Maintenance Painting Of Steel – 2000.
SSPC-VIS 2: Standard Method Of Evaluating Degree Of Rusting On Painted Steel Surfaces – 2000.
SSPC-SP2: Surface Preparation Specification For Nº 2 - Hand Tool Cleaning – 2000.
SSPC-SP3: Surface Preparation Specification For Nº 3 - Power Tool Cleaning – 2000.
SSPC-SP5: White Metal Blast Cleaning – 2000.
SSPC-SP6: Commercial Blast Cleaning – 2000.
SSPC-SP7: Brush-Off Blast Cleaning – 2000.
SSPC-SP10: Near White Metal Blast Cleaning – 1999.
SSPC-SP11: Power Tool Cleaning To Bare Metal – 2000.
SSPC-SP12: Surface Preparation And Cleaning Of Metals By Waterjetting Prior To Recoating – 2000.
و مجموعه استانداردهای SSPC
ممنون
hadi_ghorbani
عضو جدید
API 661
API 661
با سلام
من احتیاج خیلی فوری به استاندارد API 661 مربوط به طراحی مبدلهای حرارتی دارم
ممنون میشم برام ارسال کنید
API 661
با سلام
من احتیاج خیلی فوری به استاندارد API 661 مربوط به طراحی مبدلهای حرارتی دارم
ممنون میشم برام ارسال کنید