نقشه هاي هواپيماي مدل

[boyboy]

( TERMINATOR 400 ) ---- Fred Van Der Hoek designed and built the T-400 in late '99. and the plane is flying a year later. The prototype is powered by a direct drive Speed 400, Hitech 555 rx. it is covered with light silkspan, with 3 coats of thinned out clear dope to get the weight down to 14 oz.with (7) .500 cells velcroed to the bottom for easy access. The performance is medium hot! Model Spec's
Wingspan ------------- 26 3/4"
Length ----------------- 15"
Power ------------------ speed 400
Weight w/Battery-------- 14 oz.


( AERONCA L-3 ) Speed 400. This is a Roger Winger design of a Aronca sent in by www.rcland.net. visit his site for a wealth of RC information. Model Spec's
Wingspan ------------- 40 inch.
Power ------------------



( SKYVAN ) This design of the Skyvan was sent in by Roger Jones . Built by Short Brothers in Northern Ireland in the 60's This is an electric version. Model Spec's
Wingspan ------------- .
Power ------------------



( LOCKEED C-130 ) This C-130 Electric is a Johann Delago design, sent in by Eddy Matthews. If your are looking for something different here it is! Model Spec's
Wingspan ------------- .
Power ------------------



( DC-3 DAKOTA ) This design was sent in by Roger Jones . Nicely drawn up version of an electric DC-3. Model Spec's
Wingspan ------------- .
Power ------------------

 

[boyboy]

( AMP ) This a Al Eastman electric design supplied by www.rcland.net. The picture was sent in by Ronald Whisenhunt, Scratch built from these plans, nice job Ron! Model Spec's
Wingspan ------------- 48 inch.
Power ------------------ Elect.



( GOLDIE 2 ) is a Bill Bowne design, has aileron/elevator/rudder for aerobatics ------------------- Model Spec's
Wingspan ------------- .
Power ------------------



( FOKKER D-VII ) is a highly detailed Bill Bowne design, it has a geared Speed 400 For power ---------------------------------------------- Model Spec's
Wingspan ------------- .
Power ------------------ Speed 400



( EASTWIND II ) This Twin electric designed by Al Eastman and sent in by Eddy Matthews. Should be interesting to the electric builder. Model Spec's
Wingspan ------------- .
Power ------------------



( MABUCHI RS 540 ) This motor design was sent in by Glenndelco@aol.com Should be of interest to the electric builder. Model Spec's
Wingspan ------------- .
Power ------------------

 

[boyboy]

( BRISTOL SCOUT ) An excellent detailed design by J.C. Wilkerson of the type D. Light weight stick and tissue construction. Model Spec's
Wingspan ------------- 32".
Power ------------- Speed 280



( SOPWITH PUB ) Another great detailed design by J.C. Wilkerson of the PUP. Light weight stick and tissue construction. Model Spec's
Wingspan -------------
Power ------------------ speed 280



( SOPWITH SHALLOW ) Designed by J.C. Wilkerson, the Sopwith Swallow was a one of a kind airplane. Sopwith used a Camel Fuse and installed a large parasol wing. The real thing was dissapointing but the model is a lot better. Light weight stick and tissue construction. Model Spec's
Wingspan ------------- 32"
Power ------------------ speed 280



( CURTIS OSPREY ) Highly detailed design by J.C. Wilkerson, is the Curtis Osprey from the "Golden Age " of aviation. The model has a 30 " wingspan and is powered by a speed 280. Light weight stick and tissue construction. Model Spec's
Wingspan ------------- 30"
Power ------------------ speed 280



( MILES MAGISTER ) Is a J.C. Wilkerson design of a 1937 trainer for British pilots of WW2. I put together some construction notes in Word and included a picture from the Shuttleworth Trust.Light weight stick and tissue construction. Model Spec's
Wingspan ------------- 30"
Power ------------------ speed 280

 

[boyboy]

( NIEUPORT 17 ) Is another J.C. Wilkerson design of a Nieuport 17 of stick and tissue construction. Motor - S280, Wingspan 30" with construction notes. Model Spec's
Wingspan ------------- 30"
Power ------------------ speed 280



( THOMAS-MORSE 4C ) Another excellent J.C. Wilkerson design of a Thomas-Morse of stick and tissue construction. Motor - S280, Wingspan 30". Model Spec's
Wingspan ------------- 30"
Power ------------------ speed 280



( WJW ) This is a Ron Whisenhunt design of a plane made from alternative materials "Foamboard" construction. The file includes instructions. Very interesting, give it a try! Model Spec's
Wingspan ------------- 38"
Power ------------------ 380 and Gearbox



( SPITFIRE PROFILE ) This is a great PDF plan of a depron profile mk IX spitfire designed by Kevin wild. it is made from 6mm depron and carbon tube. Model Spec's
Wingspan ------------- 38"
Power ------------------ Brushless



( WILDTHING 400 ) ---- Ken Neal sent this design he developed based on a scaled down Wildthing, and he called it the "Wildthing 400". A great flier with a Speed 400 and 8 cell pack. Model Spec's
Wingspan ------------- 28 1/4"
Length -----------------
Power ------------------ speed 400
Weight w/Battery-------- 15 oz.


( UPS-UH-DASEY ) A nicely detailed Electric sent in by Gary Reese, He says it will work inside or outside. Give this one a try. Model Spec's
Wingspan ------------- 30".
Power ------------------ 180G - 280D



( NOR-BRIT ISLANDER) This is another Electric just sent in by Gary Reese, It looks very interesting and should make a good flyer. Model Spec's
Weight ------------- ".
Power ------------------ Geared 180s - 280s

 

[boyboy]

[FONT=Verdana, Arial, Helvetica] http://plans.rcmodell.hu/index.html[/FONT]
( BARNSTORMER ) ---- Barnstormer--Designed by Lou Andrews, this Control line stunter was popular in the 50's. Model Spec's
Wingspan ------------- 48"
Power --------------- .29 to .40
Download DXF File


( CHIEF TOO ) The classic Control Line stunter from the 50's era. This early 'flapped' classic was first kitted with a 'laminar flow' type airfoil (ala the P-51) and enclosed cockpit. The 2nd version, modified and CAD drawn here, had open tandem cockpits and conventional symmetrical airfoil. Thanks goes to Bob Palmer for his positive contributions to control line stunt! Model Spec's
Wingspan ------------- 52"
Power --------------- .40
Download DXF File


( DALLAIRIOUS ) ---- The Dallaire Sporster was designed in 1936 (the year of my birth). It was LARGE--Wingspan of 108"! The Dallaireious is a scaled down version with a span of 80". Construction has been modified for 3 chan. R/C assist and glo. 60 power. . Model Spec's
Wingspan ------------- 80"
Power ------------------ 60 size

Download DXF File


( GUFF ) ---- From 1940--Dr. Walt Good's Guff. With the modifications for 3 channel R/C, I call it Guff Too. It's powered with a Fox .45. Model Spec's
Wingspan ------------- 72"
Power --------------- .45
Download DXF File


( MOHAWK BUZZARD ) ---- Here's the Modified Mohawk Buzzard Jr. from 1946. Designed by J. H. Schneider, this class A design was originally powered by a Bantam .19 ign.-It had a span of 44.5 ", a triangular fuse. x-section, and a wing area of 288 sq." I have blown it up to 55", Squared the fuse. x-section (to accomodate the R/C gear), Changed the airfoil, changed the size and construction to handle the power of a modern glo engine, and adapted it to 3 chan. necessities. Rec. power: .19 to .25 glo. Model Spec's
Wingspan ------------- 55"
Power --------------- .19 to .25
Download DXF File


( PLAYBOY SR. "too" ) This is a 3 chan. R/C adaptation of Joe Elgin's famous design, the Playboy Sr. Those wishing to use .29 to .40 power might consider scaling the plan to 72" span. 80" span would handle the .45 to .60 power range best. Model Spec's
Wingspan ------------- 72"
Power --------------- .29 to .40
Download DXF File


( QUAKER TOO ) Here's a popular old timer that I just finished drawing. The Quaker 'too' is Based on the popular Quaker Old timer from 1937. This bird sports a 7 foot wing span, and was originally powered by a first generation ignition Brown Jr. .60. It's set up for 3 channel R/C assist, and powered by glo .40 to .60. Use a .60 if you desire a 'screaming' climb. Model Spec's
Wingspan ------------- 84"
Power --------------- .40 to .60
Download DXF File


( RAMBLER TOO ) ---- This airplane was designed in 1939 by Gilbert Shuman of the New York Aeronuts. It was originally powered by a Brown Jr. .60 ignition, and had a 72" wing. The Rambler 'too' has been scaled to 78" span, and powered with modern glo .40 to 60. The necessary changes have been made to enhance 3 chan. R/C assist operation. Shown on the plan are the original Brown Jr., and the Fox .45 BB R/C. Those wishing to build an origional size model should scale the plans to 72" span. Power recommended for this version is .29 to .40 glo. Model Spec's
Wingspan ------------- 78"
Power --------------- .40 to .60
Download DXF File


( STUNT ) The 1960's Stunter is a common design that served as a weekend workhorse in the late '50's and 60's. Many were built, using standard size wood stock. Landing gear was optional. Model Spec's
Wingspan ------------- 42"
Power --------------- .29 to .40
Download DXF File


( TORC ) ---- Here's the TORC A 1936 design originally powered by a Brown Jr. I've Re-engineered it to operate as a 3 channel R/C bird, and suggest a power range of .29 to .45 glo. The wing span is 72". The Brown Jr. & HB .40 PDP are shown on the plans. --- Peter bunnett sent this picture of his TORC. Well done Pete! Model Spec's
Wingspan ------------- 72"
Power --------------- .29 to .45
Download DXF File


( WEDGY ) ---- The Wedgy was a class "A" bird powered with a Bantam .19 ignition. It was a small airplane by todays standards. I've blown it up to 63" wingspan and powered it with a Fox .15BB. This won't be a screamer, but the Fox .15 has quite a bit more power than the Bantam .19 does. Engines from .15 to .25 recommended. Model Spec's
Wingspan ------------- 63"
Power --------------- .15 to .25
Download DXF File


( WESTERNER 2 ) ---- Designed as the Westerner by Don Foote, this oldtimer has lovely, classic, lines. The necessary modifications have been incorperated to enhance 3 channel R/C operation on .60 glo. power. Scaled to 72" span.. Model Spec's
Wingspan ------------- 72"
Power ---------------- .60
Download DXF File


( ZOOPER DOOPER ) Here's a take off of a classic C/L stunter of the late '40's and early 50's. Designed by Jim Saftig, the Zilch series came in various sizes and featured large wing areas, and thin symmetrical airfoils, and were 'zippy' flyers. The Super Duper Zilch is one of the larger airplanes of this series, and is the basis for the Zooper Dooper Zilch presented here. Power shown is an ignition Atwood Triumph .49/.51. Also shown is a Fox .59 Glo. Model Spec's
Wingspan ------------- 52"
Power --------------- .49 to .515
Download DXF File


( SPOOK ) Excellent RC version designed by Glenn Morris, of the 1940's ModelCraft "SPOOK". He added two wing designs. One for three channel operation and a second wing with large Ailerons and reduced dihedral for four channel use. Model Spec's
Wingspan ------------- 72"
Power --------------- .48 4 cyc.
Download DXF File



[FONT=Verdana, Arial, Helvetica] http://plans.rcmodell.hu/index.html[/FONT]
( MITE 2 ) Excellent drawing , of the old "MITE" sent in by Chuck Griffith. He also added a parts drawing. Model Spec's
Wingspan ------------- "
Power --------------- .049
Download DXF File

 

[boyboy]

( STEAMBOAT )--- This is a Great Geoff Axford design.------------------------------------------------------------------------------------- Model Spec's
Length ----------------- "
Power ------------------

( TUG BOAT )--- A very nice drawing of a tug boat design by Craig Douman --------------------------------------------------. Model Spec's
Length ----------------- "
Power ------------------

 

[boyboy]

( PIZZA BOX FLYER )--- This is wild Dave McDonald design of the Pizza Box Flyer. The boys in the club told me, it was a BLAST ! Fast to build, Easy to do things you never thought you could, and You got to build one of these! For full instructions go to his Web Site Model Spec's
Wing Span ----------------- 24"
Power ------------------ .25 - .40

( MOSTRRO ) is a P.Pastorino combat design. looks like a winner ------------------------------------------------------ Model Spec's
Wingspan ------------- ".
Power ------------------



( JUNK YARD DOG ) is a good one for all you Fun Fly Guys, designed by Andy Mcnew ------------------------------------------------------ Model Spec's
Wingspan ------------- ".
Power ------------------ .40



( PIT BULL ) The Pit Bull is another Andy Mcnew Fun Fly design -------------------------------------------------------------------------- Model Spec's
Wingspan ------------- ".
Power ------------------ .



( JAKE ) is the third in the series of fun fly designs by Andy Mcnew --------------------------------------------------------------------- Model Spec's
Wingspan ------------- ".
Power ------------------ .40




( TACO II ) Is a nice design for a Fun Fly. First designed by Troy Smith and redesigned by paul Swanson. Dave sent this picture of his taco, great job Dave!--------------------------------------------------------------------- Model Spec's
Wingspan ------------- "37.
Power ------------------ .25



( WEEKENDER ) Gregg Prudence sent in this plan for a fun fly. looks like an easy and fun build.--------------------------------------------------------------------- Model Spec's
Wingspan ------------- 46 ".
Power ------------------ .40

 

[boyboy]

[FONT=Verdana, Arial, Helvetica]http://plans.rcmodell.hu/index.html[/FONT] ( AJ-065 ) AJ .065 Firecracker-Produced by Jim Walker's AJ Aircraft Co. of Portland, OR--Had a pneumatically operated throttle system.
( ARDEN ) Arden .199 & .099--Produced by Ray Arden (the inventor of the glo-plug) from 1946 to 1949
( AVION ) Avion Mercury- Produced by Avion Aircraft Mnfg Co. from the mid 1930's to 1947. A large engine of 1.609 cu. in. disp. Was 7 1/4 " long. For-runner to quarter scale engines.
( ATOM ) Atom .097--Designed by Ray Arden and mnfd. from 1939 to 1946--5 models produced -----------
( ATWOOD ) Atwood Blue Crown .603--Mnfd. by Bill Atwood in 1940. For Race cars--Had 2 intakes. ------
( ATWOOD 50 ) Atwood Triumph .49/.51-Mnfd by Atwood Motors in 1948 in ign. an glo models.----------------------------
( ATWOOD 60 ) Atwood Champion mod. J .624-produced by Atwood Mfg. Co. in 1945 ---------------------------
( ATWOOD GD ) Atwood Super Champ mod. DR (ign) & GD (Glo Devil)-mfd. by Atwood Motors in 1947/48 --------------------------
( BABY CYCLONE ) Baby Cyclone .364--5 models produced from 1935 to 1938-mnfd. by Aircraft Industries
( BABY SPITFIRE ) Baby Spitfire .045--From 1949--Produced by Mel Anderson in Los Angeles ----------------------
( BARKER ) Barker .691--5 models produced by Barker Engineering in 1940, '41, and '46 ------------

 

[boyboy]

( BARKER ) Barker .691--5 models produced by Barker Engineering in 1940, '41, and '46 ------------
( BANSHEE ) Banshee .64 (.638)--From 1945--Racing engine produced in Canada by Barrett Engines -----------
( BANTAM ) Bantam .199--Produced by Minature Motors and OK Motors in 1947 ---------------------
( BLACK PANTHER ) Black Panther ,60-from 1941-produced to power surface vehicles --------------
( BROWNIE ) From 1940-Brownie .29---Mnfd by Brown Motors -----------------------------
( BROWN JR. ) Brown Jr. .60. One of the first production model engines produced in the 1930's.
( BULLET ) Bullet .275-from 1946/47-mnfd by Miniature Motors Co. ---------------------------
( BUNCH ) Bunch Tiger Aero .45-mnfd. in Los Angeles in 1941, and again in 1946 by Bunch Model Airplane Co.
( BUZZ 29 ) Buzz .29-From 1948. Mnfd by Judscon for America's Hobby Center. ------------------
( BUZZ 60 )Buzz 60- from 1948-mfd. by Judscon Co.--------------------------------------------
( CAMERON 9 ) The Cameron was produced for tether race cars, and Marine applications by Cameron Mfg.
( CAMERON 19 ) Cameron .19-from 1952 produced with ringed or lapped pistons by the Cameron Bros.
( CAMERON 23 ) Cameron .23- from 1946- mfd. by Cameron Bros.--------------------------------------
( Cannon ) Cannon .36 (.358)-2 models produced by Cannon Mfg. Co. (1941 & 1946)--example shown from 1946.
( CIRCLE 30 ) Circle .297 ign. engine produced by Laskin Mfg. Co. in 1947.-------------------------------
( CONDOR KOPPER KING ) Condor Kopper King-Mfg. in 1941 & 1945 by Pittsburg Brass Mfg. Co. & Miller Machine Prods. ----------------------------
( COMET 35 ) Comet .35-Mfg. By Comet Model Airplane Co. in 1941. ---------------------------------
( COBEY-WAITE 15 ) Cobey-Waite .147- Mfd. in 1946 by Moulded Insulation Co.-----------------------------------
( CONTESTOR 60 ) Contestor D60S- Mfd. in 1946 by Lucas & Smith ---------------------------------

 

[boyboy]

( DENNYMITE ) Produced by movie actor Reginald Denny in several variations.----------------------------
( DOOLING .29 ) From the 1950's- Dooling .29 Mfd. in Los Angeles by the Dooling Bros.
( DRONE B ) Drone B MkII-Diesel of .29 disp. mnfd. in 1948 by Leon Shulman's Drone Engineering Co.
( ELF ) Elf Single .097- Introduced in 1940 by Elf Engine Co --------------------------
( ELF 14 ) Elf 'Corncob' .139- Mfd. 1n 1936 by Dan Calkin's Elf Motor Co.---------------------------
( ELF TWIN ) From 1940/41-Elf Twin .198 --- Mnfd in Portland, OR ------------------------------
( FLEETWIN ) Fleetwind .60 from the 1940's -------------------------------------------------------
( FORSTER 29 - 35 ) Forster .29R & .35R- model Forster produced by Forster-Appelt in 1958 ----------
( Forster 99 ) Forster .99---Produced in several versions by the Forster Bros. --------------
( FOX 19) Another popular early glo engine by Duke Fox --------------------------------------------
( FOX 35 ) Fox .35 3rd model- Popular control line stunt engine by Duke Fox ---------------
( FOX 59 ) Produced by Duke Fox --- this Long Shaft model is prized by collectors ---------------------
( FOX TWIN ) Fox Twin--Horizontally opposed twin of .120 displacement produced by Duke Fox
( HASSAD ) The Hassad Custom ----Was primarily used in tether race cars. --------- ( HURRICANE ) Hurricane .245--Mnfd in 1942/1945 in Canada -----------------------------
( HB 40 ) Fine European R/C engine Now mnfd. in USA by MECOA ----------------------------
( H&H .45 ) The first glo engine. Had an integral glo head. Mnfd. in 1946 in Morristown, PA

 

[boyboy]

دانلود​

حجم​

توضیحات​

10.5 MB​

دو جلد کتاب طراحی موتورهای مینی جت با نامهای Model Jet Engines و Home Built Model Turbines همراه با نرم افزار اجرا کننده مجموعاً 213 صفحه

980 Kb​

مقاله طراحی گلایدر مدل و محاسبات مربوطه​

 

[boyboy]

Drive Calculator​

نرم افزاری قدرتمند و کامل جهت محاسبات قدرت موتور هواپیماهای الکتریکی و سایر محاسبات مربوطه​

Size: 4.94 MB
​

CONVERT 1.0​

نرم افزار بسیار کارآمد و ساده برای تبدیل واحدهای طول، مساحت، حجم، نیرو، جرم، چگالی، سرعت، شتاب، دما، زمان، گشتاور، فشار، قدرت، زاویه و ...​

Size: 568 KB
​

Airplane Design Calculator​

نرم افزاری طراحی هواپیما قابل اجرا در Excel​

Size: 166 KB
​

​

Sailplane Calculator 2005​

نرم افزار طراحی گلایدر همراه با راهنما و لغت نامه
قابل اجرا در Excel​

Size: 208 KB
​

Mean Aerodynamic Chord (MAC) Calculator​

نرم افزار محاسبه وتر متوسط ایرودینامیکی بال با قابلیت رسم شکل و چاپ ​

Size: 104 KB
​

CL Calculator​

نرم افزاری ساده برای محاسبه ضریب لیفت بال​

Size: 128 KB
​

Turn Radius Calculator​

نرم افزار محاسبه شعاع گردش ، ضریب لیفت و G load با قابلیت تبدیل واحد ​

Size: 144 KB
​

Effective Dihedral Angle Calculator​

نرم افزاری ساده برای محاسبه زاویه هفتی موثر بالهای چند زاویه ای
قابل اجرا در Excel​

Size: 52 KB
​

Electric Motor Performance​

نرم افزار محاسبه کارآیی، مصرف انرژی و بازده موتورهای الکتریکی​

Size: 156 KB
​

Thermal Calculator​

نرم افزاری بسیار ساده برای پیدا کردن شرایط مطلوب پرواز روی جریان بالا رونده هوای گرم ​

Size: 24 KB
​

استفاده از مطالب این سایت با ذکر منبع مجاز می باشد
​

 

[boyboy]

سلام بر همه دوستان ...

آقا خواستم 100 تا نقشه یک جا بزارم دیدم خون بالا میارم

تا هم را یکی یکی پست کنم ، پست به بزرگی خودتون ببخشید ...

فایل زیر نقشه ساخت 69 هواپیمای مدل ، همه را ZIP کردم یک جا دانلود کنید حالش ببرید ...

حجم فایل 13.8 مگابایت است :

دانلود کنید :http://jblaox.persiangig.com/Map%20aircraft.rar

 

[Tomcat_strike]

بابا ایول. اگه ممکنه در مورد نقشه های هواپیمای مدل با موتور پالس جت رو آپلود کن.
مرسی

 

[zxo003]

دزدی یعنی این

دزدی یعنی این

سلام بر همه دوستان ...

آقا خواستم 100 تا نقشه یک جا بزارم دیدم خون بالا میارم

تا هم را یکی یکی پست کنم ، پست به بزرگی خودتون ببخشید ...

فایل زیر نقشه ساخت 69 هواپیمای مدل ، همه را ZIP کردم یک جا دانلود کنید حالش ببرید ...

حجم فایل 13.8 مگابایت است :

دانلود کنید :http://jblaox.persiangig.com/Map aircraft.rar

الان امدم دیدم پست من اینجا دوباره منتشر کردن تو کف موندم !!!
لینک منبع پس کو ؟؟ خوب برم لینک دانلود عوض کنم ؟؟؟

 

[skycrypter]

همه ***** شدن